A Review on Finite Element Simulations in Metal Forming
نویسندگان
چکیده
Finite element simulations are often required to reduce the experimental cost and time by reducing number of trials in the product development cycle. Metal forming is one of such area where a lot of trials are required to arrive at the die design to produce defect free parts. Hence in this paper the authors review the literature on finite element analysis in the area of metal forming
منابع مشابه
The Relationship between Constant Friction Factor and Coefficient of Friction in Metal Forming using Finite Element Analysis
Frictional shear stress is usually determined by utilizing the coefficient of friction or the constant friction factor models. The present study deals with finite element analysis of double cup extrusion process to determine the relationship between constant friction factor (m) and coefficient of friction (µ), since the metal flow in this process is very sensitive to frictional conditions. Ther...
متن کاملFinite element simulation of two-point incremental forming of free-form parts
Two-point incremental forming method is considered a modern technique for manufacturing shell parts. The presence of bottom punch during the process makes this technique far more complex than its conventional counterpart i.e. single-point incremental forming method. Thus, the numerical simulation of this method is an essential task, which leads to the reduction of trial/error costs, predicts th...
متن کاملA Study on the Forming of Sheet Metal Parts Using Multi-Point Forming Technology
In recent years, in order to reducing die design and manufacturing costs, Multi point forming technique has gained an increasing interest because of its high flexibility. In this process, the conventional fixed shape solid die sets are replaced with a pair of opposite matrices of controllable elements. In this paper, the fundamental principles of multi-point forming was described and the possib...
متن کاملA Study on the Forming of Sheet Metal Parts Using Multi-Point Forming Technology
In recent years, in order to reducing die design and manufacturing costs, Multi point forming technique has gained an increasing interest because of its high flexibility. In this process, the conventional fixed shape solid die sets are replaced with a pair of opposite matrices of controllable elements. In this paper, the fundamental principles of multi-point forming was described and the possib...
متن کاملAn Investigation into the Deep Drawing of Fiber-Metal Laminates based on Glass Fiber Reinforced Polypropylene
Abstract Fiber-metal laminates (FMLs) are new type of composite materials which could improve defects of traditional composites in ductility, formability, impact and damage tolerance. Drawing behavior of a thermoplastic based FML was investigated consisting of glass-fiber reinforced polypropylene composite laminate and aluminum AA1200-O as the core and skin layers, respectively. The effects o...
متن کامل