Measurement of Stickiness with Pressure Distribution Sensor
نویسندگان
چکیده
We developed and evaluated a device that can be used for the quantitative measurement of stickiness. While a typical pressure distribution sensor can measure a pressing force, it cannot measure a tensile force. We therefore installed a pin array on a sensor, with the pin array applying an offset pressure to the sensor through its weight. We measured the stickiness of natto and baby powder using the developed device.
منابع مشابه
Design and development of ShrewdShoe, a smart pressure sensitive wearable platform
This study introduces a wearable in-shoe system for real-time monitoring and measurement of the plantar pressure distribution of the foot using eleven sensing elements. The sensing elements utilized in ShrewdShoe have been designed in an innovative way, they are based on a barometric pressure sensor covered with a silicon coating. The presented sensing element has great linearity up to 300...
متن کاملAn Optical Measurement System to Measure Velocity and Provide Shock Wave Pressure Diagrams
This paper introduces an optical measurement system for shock wave characteristics. The system works by mountinga metal plate attached to spring mounts against the shock wavefront. This set is sealed and can plot the shock wave pressure diagram by measuring plate's displacement, radiation and changing the reflection of light during shock wave conflict, and converting these optical data to volta...
متن کاملDesign and Simulation of piezorestive pressure sensor for AFM Probe the displacement measurement
investigating pressure applied in surface vertically that is done by use of mechanical procedures isn’t efficient to measure pressure applied in inner surface of reservoir or pipes having gas due to entering pressure into whole walls and different surfaces. So, in order to measure this kind of pressure, several studies were conducted in past decades and also various procedures were proposed tha...
متن کاملDesign of High Sensitivity and Linearity Microelectromechanical Systems Capacitive Tire Pressure Sensor using Stepped Membrane
This paper is focused on a novel design of stepped diaphragm for MEMS capacitive pressure sensor used in tire pressure monitoring system. The structure of sensor diaphragm plays a key role for determining the sensitivity of the sensor and the non-linearity of the output.First the structures of two capacitive pressure sensors with clamped square flatdiaphragms, with different thicknesses are inv...
متن کاملEvaluation of cotton fibers stickiness by colorimetric method
Stickiness is the physical process of contaminated lint adhering to equipment. The degree of stickiness depends on chemical identity, quantity, and distribution of the sugars. The sugar in cotton fibers may be insect or plant derived. There are several methods for measuring cotton fibers stickiness. In this work, a colorimetric method was used for the measurements. In the method, honeydew was c...
متن کامل