Microstructural and spectroscopic investigations into the effect of CeO2 additions on the performance of MnO2 aqueous rechargeable battery
نویسندگان
چکیده
The influence of CeO2 additions on the electrochemical behaviour of the MnO2 cathode in a Zn-MnO2 battery using lithium hydroxide (LiOH) as an electrolyte is investigated using microscopy and spectroscopic techniques. The results showed that such additions greatly improve the discharge capacity of the battery (from 155 to 190 mAh/g) but only from the second discharge cycle onwards. Capacity fade with subsequent cycling is also greatly reduced. With an aim to understand the role of CeO2 on the discharge-charge characteristics of MnO2 and its mechanism, we have used a range of microscopy, spectroscopy and diffraction-based techniques to study the process. The CeO2 is not modified by multiple discharge and charged cycles. The CeO2 may enhance the discharge-charge performance of the battery by raising the oxygen evolution potential during charging but does not take part directly in the redox reaction.
منابع مشابه
An aqueous rechargeable battery based on zinc anode and Na(0.95)MnO2.
An aqueous rechargeable battery system is assembled by using metallic zinc and Na(0.95)MnO2 as the negative and positive electrodes, respectively. It is cheap and environmentally friendly, and its energy density is 78 Wh kg(-1). Its cycling performance is very good with only 8% capacity loss after 1000 cycles at 4 C between 1 and 2 V.
متن کاملZn/MnO2 Battery Chemistry With H+ and Zn2+ Coinsertion.
Rechargeable aqueous Zn/MnO2 battery chemistry in a neutral or mildly acidic electrolyte has attracted extensive attention recently because all the components (anode, cathode, and electrolyte) in a Zn/MnO2 battery are safe, abundant, and sustainable. However, the reaction mechanism of the MnO2 cathode remains a topic of discussion. Herein, we design a highly reversible aqueous Zn/MnO2 battery w...
متن کاملDevelopment of MnO2 cathode inks for flexographically printed rechargeable zinc-based battery
A novel roll-to-roll flexographic printing process for rechargeable zinc-based battery manufacturing was presented in this paper. Based on the fundamental operating mechanism of flexography, key criteria for developing functional flexographic printing inks were established, including composite ink rheology (steady-state viscosity and yield stress), ink wettability as well as ink dispersing qual...
متن کاملTEM characterization of MnO2 cathode in an aqueous lithium secondary battery
The discharge characteristics of manganese dioxide cathode in the presence of small amounts (1, 3 and 5 wt. %) of titanium disulphide (TiS2) additive has been investigated in an alkaline cell using aqueous lithium hydroxide as the electrolyte. The incorporation of small amounts of TiS2 additives into manganese dioxide (MnO2) was found to improve the battery discharge capacity from 150 to 270 mA...
متن کاملSelf-assembly formation of Bi-functional Co3O4/MnO2-CNTs hybrid catalysts for achieving both high energy/power density and cyclic ability of rechargeable zinc-air battery
α-MnO2 nanotubes-supported Co3O4 (Co3O4/MnO2) and its carbon nanotubes (CNTs)-hybrids (Co3O4/MnO2-CNTs) have been successfully developed through a facile two-pot precipitation reaction and hydrothermal process, which exhibit the superior bi-functional catalytic activity for both ORR and OER. The high performance is believed to be induced by the hybrid effect among MnO2 nanotubes, hollow Co3O4 a...
متن کامل