Flashing liquid jets and two-phase dispersion - A review
نویسنده
چکیده
منابع مشابه
High-Speed Internal Nozzle Flow Visualization of Flashing Jets
Flashing or thermodynamic breakup of a liquid jets occurs when a pressurized, subcooled or saturated liquid is released to a lower pressure, resulting in violent vapor nucleation, expansion, and breakup of the liquid phase. Flashing is known to produce very fine droplet atomization, often not possible by other means. Despite its usefulness as an atomization method, the fundamental processes inv...
متن کاملExperimental Investigation of Phase Inversion of Liquid-Liquid Systems in a Spray Extraction Column
An experimental study of the phase inversion behavior of liquid-liquid dispersion has been conducted in a spray extraction column for systems of toluene / water, n-hexane/water, CCl4/water, toluene /water + glycerol (25 % wt), toluene + CCl4 (25 % wt) / water and toluene / acetic acid (5 % wt)/water. The effects of physical properties, mass transfer and column geometry...
متن کاملTwo Phase Flow Pressure Drop Calculation Using Homogeneous Equilibrium Model
Although two-phase flow is frequently encountered in various location of the process plants, there is no a general accepted and verified two-phase flow model that may be used to size lines for such conditions. An obvious example is condensate water return lines. The API method that used in this study is based on the homogeneous equilibrium flow assumption, that is, equal velocity and equal temp...
متن کاملVapor/liquid phase interaction in flare flashing sprays used in dermatologic cooling
Little knowledge exists concerning the atomization mechanisms and dispersion of flashing sprays in dermatologic cooling. This study examines flashing of a high superheat fluid flowing through micro tube nozzles resembling current medical devices. A one-dimensional, semi-empirical model of refrigerant flow through capillary tubes is used to quantify internal flow characteristics. These results p...
متن کاملHeat Transfer under Double Turbulent Pulsating Jets Impinging on a Flat Surface
In this study, the numerical analysis of turbulent flow and heat transfer of double pulsating impinging jets on a flat surface has been investigated. The unsteady two-dimensional numerical solution for two similar and dissimilar jets was performed using the RNG k-ε model. The results showed that the RNG k-ε model has more satisfactory predictions of the Nusselt number distribution. Comparisons ...
متن کامل