Electrical power dissipation in semiconducting carbon nanotubes on single crystal quartz and amorphous SiO2
نویسندگان
چکیده
crystal quartz and amorphous SiO2 Cheng-Lin Tsai, Albert Liao, Eric Pop, and Moonsub Shim Department of Materials Science and Engineering, University of Illinois, Urbana, Illinois 61801, USA Frederic Seitz Materials Research Laboratory, University of Illinois, Urbana, Illinois 61801, USA Department of Electrical and Computer Engineering, University of Illinois, Urbana, Illinois 61801, USA Micro and Nanotechnology Laboratory, University of Illinois, Urbana, Illinois 61801, USA Beckman Institute, University of Illinois, Urbana, Illinois 61801, USA
منابع مشابه
Selective growth of well-aligned semiconducting single-walled carbon nanotubes.
High-density arrays of perfectly aligned single-walled carbon nanotubes (SWNTs) consisting almost exclusively of semiconducting nanotubes were grown on ST-cut single crystal quartz substrates. Raman spectroscopy together with electrical measurements of field effect transistors (FETs) fabricated from the as-grown samples showed that over 95% of the nanotubes in the arrays are semiconducting. The...
متن کاملElectrical transport properties of small diameter single-walled carbon nanotubes aligned on ST-cut quartz substrates
A method is introduced to isolate and measure the electrical transport properties of individual single-walled carbon nanotubes (SWNTs) aligned on an ST-cut quartz, from room temperature down to 2 K. The diameter and chirality of the measured SWNTs are accurately defined from Raman spectroscopy and atomic force microscopy (AFM). A significant up-shift in the G-band of the resonance Raman spectra...
متن کاملPreferential Growth of Semiconducting Single-Walled Carbon Nanotubes by a Plasma Enhanced CVD Method
Single-walled carbon nanotubes (SWNT) are grown by a plasma enhanced chemical vapor deposition (PECVD) method at 600 °C. The nanotubes are of high quality as characterized by microscopy, Raman spectroscopy, and electrical transport measurements. High performance field effect transistors are obtained with the PECVD nanotubes. Interestingly, electrical characterization reveals that nearly 90% of ...
متن کاملTaguchi Approach and Response Surface Analysis for Design of a High-performance Single-walled Carbon Nanotube Bundle Interconnects in a Full Adder
In this study, it was attempted to design a high-performance single-walled carbon nanotube (SWCNT) bundle interconnects in a full adder. For this purpose, the circuit performance was investigated using simulation in HSPICE software and considering the technology of 32-nm. Next, the effects of geometric parameters including the diameter of a nanotube, distance between nanotubes in a bundle, and ...
متن کاملThe selective removal of metallic carbon nanotubes from As-grown arrays on insulating substrates
We present a method of selectively removing metallic single-walled carbon nanotubes (SWCNTs) from as-grown arrays on quartz substrates. The process utilizes an external silicon piece as a temporary global top gate to increase the resistance of the semiconducting SWCNTs while current is passed through the metallic SWCNTs, causing electrical breakdown through joule heating. The resulting SWCNT fi...
متن کامل