Composite fluorocarbon membranes by surface-initiated polymerization from nanoporous gold-coated alumina.
نویسندگان
چکیده
This manuscript describes the versatile fabrication and characterization of a novel composite membrane that consists of a porous alumina support, a 100 nm thick nanoporous gold coating, and a selective poly(5-(perfluorohexyl)norbornene) (pNBF6) polymer that can be grown exclusively from the nanoporous gold or throughout the membrane. Integration of the three materials is achieved by means of silane and thiol chemistry, and the use of surface-initiated ring-opening metathesis polymerization (SI-ROMP) to grow the pNBF6. The use of SI-ROMP allows tailoring of the extent of polymerization of pNBF6 throughout the structure by varying polymerization time. Scanning electron microscopy (SEM) images indicate that the thin polymer films cover the structure entirely. Cross-sectional SEM images of the membrane not only corroborate growth of the pNBF6 polymer within both the porous alumina and the nanoporous gold coating but also show the growth of a pNBF6 layer between these porous substrates that lifts the nanoporous gold coating away from the alumina. Advancing contact angle (θ(A)) measurements show that the surfaces of these composite membranes exhibit both hydrophobic (θ(A) = 121-129)° and oleophobic (θ(A) = 69-74)° behavior due to the fluorocarbon side chains of the pNBF6 polymer that dominate the surface. Results from electrochemical impedance spectroscopy (EIS) confirm that the membranes provide effective barriers to aqueous ions, as evidenced by a resistive impedance on the order of 1 × 10(7) Ω cm(2). Sulfonation of the polymer backbone substantially enhances ion transport through the composite membrane, as indicated by a 40-60 fold reduction in resistive impedance. Ion transport and selectivity of the membrane change by regulating the polymerization time. The fluorinated nature of the sulfonated polymer renders the membrane selective toward molecules with similar chemical characteristics.
منابع مشابه
Atomic layer deposition-based functionalization of materials for medical and environmental health applications
Nanoporous alumina membranes exhibit high pore densities, well-controlled and uniform pore sizes, as well as straight pores. Owing to these unusual properties, nanoporous alumina membranes are currently being considered for use in implantable sensor membranes and water purification membranes. Atomic layer deposition is a thin-film growth process that may be used to modify the pore size in a nan...
متن کاملThermally Stable Nanoporous Gold-Alumina Core-Shell with Tunable Optical Transmission
Tuning localized surface plasmon resonance (LSPR) of nanoporous metals is crucial to manipulate light within tiny volumes for the implementation of optical devices at the nanoscale. Herein, nanoporous gold-alumina core-shell films with constant gold skeleton and variable alumina sheaths are fabricated by means of chemical corrosion and subsequent atomic layer deposition. Optical transmission pr...
متن کاملEngineering optical properties of gold-coated nanoporous anodic alumina for biosensing
The effect in the Fabry-Pérot optical interferences of nanoporous anodic alumina films coated with gold is studied as a function of the porosity and of the gold thickness by means of reflectance spectroscopy. Samples with porosities between 14 and 70% and gold thicknesses (10 and 20 nm) were considered. The sputtering of gold on the nanoporous anodic alumina (NAA) films results in an increase o...
متن کاملSurface-Initiated Polymerization of 5-(Perfluoro-n-alkyl)norbornenes from Gold Substrates
We report the surface-initiated ring-opening metathesis polymerization (SI-ROMP) of 5-(perfluoro-n-alkyl)norbornenes (NBFn) to grow partially fluorinated polymer films of tunable thicknesses ranging from tens of nanometers tomicrometers on gold substrates. The perfluoroalkyl chains range in length (n) from 4 to 10 carbons, representing 67-83%of the molecular weight of the repeat unit. The growt...
متن کاملDetermination of Captopril using platinum coated nanoporous gold film electrode
In this article electrochemical determination of captopril at the surface of the platinum coated nanoporous gold film (PtNPGF) electrode is reported using the cyclic voltammetry and amperometry. For the preparation of PtNPGF, the surface of NPGF electrode was covered with Cu layer using underpotential electrochemical deposition (UPD).Afterward, the copper layer is replaced with platinum ions vi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- ACS applied materials & interfaces
دوره 4 2 شماره
صفحات -
تاریخ انتشار 2012