Simultaneous Patterning of Independent Metal/Metal Oxide Multi-Layer Films Using Two-Tone Photo-Acid Generating Compound Systems
نویسندگان
چکیده
(1) The photo-induced solubility and positive-tone direct photo-patterning of iron, copper and lanthanides chelated with 4-(2-nitrobenzyloxycarbonyl)catechol (NBOC) or 4-(6-nitroveratryloxycarbonyl)catechol (NVOC) was investigated. Photo-patterning of iron, copper, cerium, samarium, europium, terbium, dysprosium, holmium, erbium and lutetium complexes was accomplished. Continuous films were formed by the pyrolysis of metal complex films at 500 °C. (2) Based on the difference in the photo-reaction excitation wavelength profile of NBOC and NVOC complexes, a short and simple method for simultaneous micro-patterning of two independent films on each side of a transparent glass substrate was developed. Using the developed procedure, indium tin oxide and/or titanium oxide films were formed on each side of a quartz substrate without use of resist or etching.
منابع مشابه
Inorganic nanoparticle multilayers using photo-crosslinking layer-by-layer assembly and their applications in nonvolatile memory devices.
We introduce a general and facile method for the preparation of organic/inorganic nanoparticle (NP) nanocomposite multilayer films that allows vertical growth of various NP layers (i.e., metal or transition metal oxide NPs) in a densely packed structure. Our approach is based on the successive photo-crosslinking layer-by-layer (LbL) assembly between hydrophobic ligands onto a NP surface and pho...
متن کاملTwo-Stage Chemical Deposition of Oxide Films
Two-stage chemical deposition (TSCD) technique is used to produce ZnO, Mn2O3 and NiO films on soda-lime glass (SL-G) from an aqueous solution of zinc, manganese and nickel complex, respectively. The TSCD method enables the deposition of metal oxide thin films with a thickness which can be controlled during the preparation procedure. The ZnO, Mn2O3 and NiO thin films were polycrystalline films w...
متن کاملSelective wet-etching of filtered arc deposited TiN films on Cr sacrificial layers
Titanium Nitride (TiN) is a wear resistant and complementary metal oxide silicon (CMOS) compatible material that is increasingly being investigated for MEMS applications. Incorporating any new material into a MEMS device requires the development of a processing strategy. This paper discusses a wet-etching strategy for patterning and releasing TiN features on Cr sacrificial layers. Filtered arc ...
متن کاملCondition Assessment of Metal Oxide Surge Arrester Based on Multi-Layer SVM Classifier
This paper introduces the indicators for surge arrester condition assessment based on the leakage current analysis. Maximum amplitude of fundamental harmonic of the resistive leakage current, maximum amplitude of third harmonic of the resistive leakage current and maximum amplitude of fundamental harmonic of the capacitive leakage current were used as indicators for surge arrester condition mon...
متن کاملNon-uniform Composition Profiles in Inorganic Thin Films from Aqueous Solutions.
A variety of metal oxide films (InGaOx, AlOx, "HafSOx") prepared from aqueous solutions were found to have non-uniform electron density profiles using X-ray reflectivity. The inhomogeneity in HafSOx films (Hf(OH)4-2x-2y(O2)x(SO4)y·zH2O), which are currently under investigation as inorganic resists, were studied in more detail by high-angle annular dark-field scanning transmission electron micro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 2 شماره
صفحات -
تاریخ انتشار 2012