Hollow Piezoelectric Ceramic Fibers for Energy Harvesting Fabrics
ثبت نشده
چکیده
In the past few years, the growing need for alternative power sources has generated considerable interest in the field of energy harvesting. A particularly exciting possibility within that field is the development of fabrics capable of harnessing mechanical energy and delivering electrical power to sensors and wearable devices. This study presents an evaluation of the electromechanical performance of hollow lead zirconate titanate (PZT) fibers as the basis for the construction of such fabrics. The fibers feature individual polymer claddings surrounding electrodes directly deposited onto both inside and outside ceramic surfaces. This configuration optimizes the amount of electrical energy available by placing the electrodes in direct contact with the surface of the material and by maximizing the active piezoelectric volume. Hollow fibers were electroded, encapsulated in a polymer cladding, poled and characterized in terms of their electromechanical properties. They were then glued to a vibrating cantilever beam equipped with a strain gauge, and their energy harvesting performance was measured. It was found that the fibers generated twice as much energy density as commercial state-of-the-art flexible composite sensors. Finally, the influence of the polymer cladding on the strain transmission to the fiber was evaluated. These fibers have the potential to be woven into fabrics that could harvest mechanical energy from the environment and could eventually be integrated into clothing.
منابع مشابه
Energy Harvesting Electrical from Nano Beam with Layer Piezoelectric under Random Vibration
In the present paper, electrical energy harvesting from random vibrations of an Euler-Bernoulli nano-beam with two piezoelectric layers is investigated. The beam is composed of an aluminum layer together with two piezoelectric ceramic layers (PZT 5A) serving as energy harvesting sensors. In the proposed method, the equations governing the bimorph nano-beam will be analytically derived using cla...
متن کاملEnergy harvesting performance of piezoelectric electrospun polymer fibers and polymer/ceramic composites
The energy harvesting efficiency of electrospun poly(vinylidene fluoride), its copolymer vinylidene fluoride-trifluoroethylene and composites of the later with piezoelectric BaTiOon interdigitated electrodes has been investigated. Further, a study of the influence of the electrospinning processing parameters on the size and distribution of http://dx.doi.org/10.1016/j.sna.2013.03.023 2 the com...
متن کاملRedistribution of Fibers in the Structure of Hollow Ring Spun Yarn
Core yarn was spun by introducing a PVA multifilament as the core through the yarn forming zone of a ring spinning frame and viscose fibers as the sheath containing tracer fibers. The water soluble PVA multifilament was extracted from the yarn structure. Then internal structure and properties of the hollow ring yarn was assessed and compared with those of typical ring yarns. Also, two plain fab...
متن کاملNear-field electrospinning enhances the energy harvesting of hollow PVDF piezoelectric fibers
In this study we used the near-field electrospinning (NFES) process with the metallic coaxial needle injector to fabricate piezoelectric poly(vinylidene fluoride) (PVDF) hollow fiber tubes. Using these tubes, we designed an energy capture device featuring parallel electrodes to harvest low-frequency energy. We examined the effects of several parameters on the properties of the piezoelectric PVD...
متن کامل