Modeling and Control of a Fluidised Bed Dryer
نویسندگان
چکیده
In this paper, the modelling and control of the moisture content of the particles in a batch Fluidised bed dryer are studied. First, a lumped mechanistic model is developed to describe the heat and mass transfer between solid, gas and bubble phases and experimental validation shows that the model can be used to predict the particle moisture content and temperature profiles during the drying process in the bed dryer. Feedback control of material moisture content in a bed dryer is studied where the moisture content is obtained by measuring the humidity and temperature of the outlet gas. A controller is designed to achieve a desired drying rate for wet materials.
منابع مشابه
A Quasi-stationary Approach to Drying Kinetics of Different Shaped Food Particulates in a Heat Pump Assisted Fluid Bed Dryer
Experiments were undertaken to study drying kinetics of different shaped moist food particulates during heat pump assisted fluidised bed drying. Three particular geometrical shapes of parallelepiped, cylindrical and spheres were selected from potatoes (aspect ratio = 1:1, 2:1, 3:1), cut beans (length: diameter = 1:1, 2:1, 3:1) and peas respectively. A batch fluidised bed dryer connected to a he...
متن کاملFluidised bed drying of soybeans.
The fluidised bed drying characteristics of soybeans at high temperatures (110-140 degrees C) and moisture contents, 31-49% dry basis, were modelled using drying equations from the literature. Air speeds of 2.4-4.1 m/s and bed depths from 10 to 15 cm were used. The minimum fluidised bed velocity was 1.9 m/s. From a quality point of view, fluidised bed drying was found to reduce the level of ure...
متن کاملDrying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling
In the present work, the drying of calcium carbonate in a batch spouted bed dryer with inert particles has been investigated experimentally. The effect of several operating parameters including air temperature (90, 100, and 110 ˚C), air velocity (Ums, 1.2 Ums, and 1.5 Ums), and dry solid mass (5, 10, 20 g) has been studied. The Taguchi method has been applied to determine the optimal parameters...
متن کاملA Quasi-stationary Approach to Drying Kinetics of Cylindrical, Food Particulates in a Heat Pump Assisted Fluid Bed Dryer
Experiments were undertaken to study drying kinetics of moist cylindrical shaped food particulates during fluidised bed drying. Cylindrical particles were prepared from Green beans with three different length:diameter ratios, 3:1, 2:1 and 1:1. A batch fluidised bed dryer connected to a heat pump system was used for the experimentation. A Heat pump and fluid bed combination was used to increase ...
متن کاملImproving Three Phase Modeling of Fluidized Bed Dryer
Heat transfer phenomena in batch fluidized bed dryer have been studied and analyzed using three phase model including solid phase, interstitial gas phase and bubble phase based on Rizzi model. New correlations of heat transfer coefficient to surrounding and convection heat transfer coefficient between solid and interstitial gas are being proposed. In addition, some modifications have been d...
متن کامل