Performance analysis of IP datagram transmission delay in MPLS: impact of both the number and the bandwidth of LSPs of layer 2
نویسندگان
چکیده
LSR (Label Switching Router)s in MPLS (MultiProtocol Label Switching) networks map arriving IP flows into some labels on Layer 2 switching fabric and establish LSP (Label Switching Path)s. By using LSPs, LSRs not only transmit IP datagrams fast with cut-through mechanism, but also solve traffic engineering issue to optimize the delay of some IP datagram flows. So far, we have analyzed the performance of LSR focusing only on the maximum number of LSPs which can be set on Layer 2. In this paper, we will also consider the bandwidth allocated to each LSP and analyze the IP datagram transmission delay and the cut-through rate of LSR. We suppose the label mapping method as the data-driven scheme in the analytical model, so that the physical bandwidth of LSR is shared by both the default LSP for hop-by-hop transmission and the cut-through LSPs. Thus, we will investigate the impact of the bandwidth allocation among these LSPs on the performance.
منابع مشابه
Using a Fuzzy Rule-based Algorithm to Improve Routing in MPLS Networks
Today, the use of wireless and intelligent networks are widely used in many fields such as information technology and networking. There are several types of these networks that MPLS networks are one of these types. However, in MPLS networks there are issues and problems in the design and implementation discussion, for example security, throughput, losses, power consumption and so on. Basically,...
متن کاملPerformance Analysis for QoS Provisioning in MPLS Networks
LSR(Label Switching Router)s in MPLS (Multiprotocol Label Switching) networks map arriving IP flows into some labels on Layer 2 switching fabric and establish LSP(Label Switching Path)s. By using LSPs, LSRs can not only transmit IP packets fast with cut-through mechanism, but also solve traffic engineering issue to maximize resource utilization in the whole MPLS networks. So far, we have analyz...
متن کاملRFC 7190 MPLS and MPLS - TP
Many MPLS implementations have supported multipath techniques, and many MPLS deployments have used multipath techniques, particularly in very high-bandwidth applications, such as provider IP/MPLS core networks. MPLS Transport Profile (MPLS-TP) has strongly discouraged the use of multipath techniques. Some degradation of MPLS-TP Operations, Administration, and Maintenance (OAM) performance canno...
متن کاملDesign of Arrayed Waveguide Grating based Optical Switch for High Speed Optical Networks
This paper demonstrates the design of an Arrayed Waveguide Gratings (AWG) based optical switch. In the design both physical and network layer analysis is performed. The physical layer power and noise analysis is done to obtain Bit Error Rate (BER). This has been found that at the higher bit rates, BER is not affected with number of buffer modules. Network layer analysis is done to obtain perfor...
متن کاملMarkovian Delay Prediction-Based Control of Networked Systems
A new Markov-based method for real time prediction of network transmission time delays is introduced. The method considers a Multi-Layer Perceptron (MLP) neural model for the transmission network, where the number of neurons in the input layer is minimized so that the required calculations are reduced and the method can be implemented in the real-time. For this purpose, the Markov process order...
متن کامل