FREQUENCY response of underwater ultrasonic transducers in the near field using polarimetric polarization maintaining fiber sensors
نویسندگان
چکیده
Near-field ultrasonic response (50-2000 kHz) of an underwater 1-3 piezocomposite transducer is experimentally investigated using a polarimetric polarization maintaining fiber sensor. Measured outputs from our sensor and a reference hydrophone are observed to be comparable.
منابع مشابه
Frequency-division-multiplexed polarimetric fiber laser current-sensor array.
We demonstrate a novel frequency-domain-multiplexing technique for implementing polarimetric fiber laser current sensors. Each sensor operates at a different polarization-mode beat frequency that is modulated in response to applied electric current. A bank of bandpass filters can be used to separate signals from different sensors. A simple frequency-demodulation technique based on a phase-locke...
متن کاملUnderwater Imaging Using a 1 × 16 CMUT Linear Array
A 1 × 16 capacitive micro-machined ultrasonic transducer linear array was designed, fabricated, and tested for underwater imaging in the low frequency range. The linear array was fabricated using Si-SOI bonding techniques. Underwater transmission performance was tested in a water tank, and the array has a resonant frequency of 700 kHz, with pressure amplitude 182 dB (μPa·m/V) at 1 m. The -3 dB ...
متن کاملFiber Bragg Grating Sensors for the Oil Industry
With the oil and gas industry growing rapidly, increasing the yield and profit require advances in technology for cost-effective production in key areas of reservoir exploration and in oil-well production-management. In this paper we review our group's research into fiber Bragg gratings (FBGs) and their applications in the oil industry, especially in the well-logging field. FBG sensors used for...
متن کاملCapacitive Micromachined Ultrasonic Transducers (CMUTs) for Underwater Imaging Applications
A capacitive micromachined ultrasonic transducer structure for use in underwater imaging is designed, fabricated and tested in this paper. In this structure, a silicon dioxide insulation layer is inserted between the top electrodes and the vibration membrane to prevent ohmic contact. The capacitance-voltage (C-V) characteristic curve shows that the transducer offers suitable levels of hysteresi...
متن کاملA Fiber-Optic Current Sensor for Lightning Measurement Applications
An optical-fiber sensor based on Faraday Effect is developed for measuring total lightning electric current. It has many unique capabilities not possible with traditional current sensors. Designed for aircraft installation, the sensor is lightweight, non-conducting, structure-conforming, and is immune to electromagnetic interference, hysteresis and saturation. It can also be used on windmills, ...
متن کامل