On Increased Arc Endurance of the Cu-Cr System Materials
نویسندگان
چکیده
The study deals with arc resistance of composite Cu–Cr system materials of various compositions. The microstructure of materials exposed to an electric arc was investigated. Despite varying initial chromium contents, the same structure was formed in the arc exposure zones of all the tested materials.
منابع مشابه
Investigation of effective parameters on the performance of NF membrane in simultaneous removal of Cr (VI) and Cu from contaminated water
The present study investigates an NF process for removal of copper and hexavalent chromium, studying the effect of pH (5, 7, 9) as well as contaminants' concentration (50, 500, 5000 µg/L) at a constant pressure of 8 bar; with the recovery rate, regulated at 75±2%. To determine the main factors, affecting the system performance, and evaluate the interaction effects among the factors, the experim...
متن کاملThe Effect of Different Dopants (Cr, Mn, Fe, Co, Cu and Ni) on Photocatalytic Properties of ZnO Nanostructures
ZnO structures with different dopants (1mol% Cr, Mn, Fe, Co, Cu and Ni) have been synthesized via a simple hydrothermal method using sucrose as a template. These doped ZnO nanostructures characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and photoluminescence (PL). The photocatalytic property of these synthesized materials was studied by a pho...
متن کاملInvestigation of effective parameters on the performance of NF membrane in simultaneous removal of Cr (VI) and Cu from contaminated water
The present study investigates an NF process for removal of copper and hexavalent chromium, studying the effect of pH (5, 7, 9) as well as contaminants' concentration (50, 500, 5000 µg/L) at a constant pressure of 8 bar; with the recovery rate, regulated at 75±2%. To determine the main factors, affecting the system performance, and evaluate the interaction effects among the factors, the experim...
متن کاملBehavior of Cu-Cr Powder Mixtures During Mechanical Alloying (TECHNICAL NOTE)
In the present work, the behavior of Cu-Cr powder mixtures during mechanical alloying has been studied. The powder mixtures with 1, 3 and 6 weight percents of Cr in Cu were treated. They were milled in a ball mill with two different speeds of 250 and 500 rpm using equal numbers of 1 and 2 centimeters balls. The weight ratio of balls to powders was 10 to 1 under argon atmosphere. Ethanol was use...
متن کاملOptimization of micro hardness of nanostructure Cu-Cr-Zr alloys prepared by the mechanical alloying using artificial neural networks and genetic algorithm
Cu–Cr-Zr alloys had wide applications in engineering applications such as electrical and welding industrial especially for their high strength, high electrical as well as acceptable thermal conductivities and melting points. It was possible to prepare the nano-structure of these age hardenable alloys using mechanical alloying method as a cheap and mass production technique to prepare the non-eq...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Entropy
دوره 19 شماره
صفحات -
تاریخ انتشار 2017