Progress in integrated assessment and modelling
نویسندگان
چکیده
Environmental processes have been modelled for decades. However, the need for integrated assessment and modeling (IAM) has grown as the extent and severity of environmental problems in the 21st Century worsens. The scale of IAM is not restricted to the global level as in climate change models, but includes local and regional models of environmental problems. This paper discusses various definitions of IAM and identifies five different types of integration that are needed for the effective solution of environmental problems. The future is then depicted in the form of two brief scenarios: one optimistic and one pessimistic. The current state of IAM is then briefly reviewed. The issues of complexity and validation in IAM are recognised as more complex than in traditional disciplinary approaches. Communication is identified as a central issue both internally among team members and externally with decision-makers, stakeholders and other scientists. Finally it is concluded that the process of integrated assessment and modelling is considered as important as the product for any particular project. By learning to work together and recognise the contribution of all team members and participants, it is believed that we will have a strong scientific and social basis to address the environmental problems of the 21st Century. 2002 Elsevier Science Ltd. All rights reserved.
منابع مشابه
An Integrated DEA and Data Mining Approach for Performance Assessment
This paper presents a data envelopment analysis (DEA) model combined with Bootstrapping to assess performance of one of the Data mining Algorithms. We applied a two-step process for performance productivity analysis of insurance branches within a case study. First, using a DEA model, the study analyzes the productivity of eighteen decision-making units (DMUs). Using a Malmquist index, DEA deter...
متن کاملAn Integrated Baseline Geodatabase for Facilitating the Environmental Impact Assessment Process: Case Study of Sabalan Geothermal Project, Iran
Baseline data represent one of the important stages of Environmental Impact Assessment (EIA) procedure that describes the existing environment of the study area and surrounding areas in enough detail to allow the environmental impacts of the proposed area to be accurately and adequately assessed, and future changes and effects can be measured. Baseline data may be inaccurate, difficult to obtai...
متن کاملCrop modelling for integrated assessment of risk to food production from climate change
The complexity of risks posed by climate change and possible adaptations for crop production has called for integrated assessment and modelling (IAM) approaches linking biophysical and economic models. This paper attempts to provide an overview of the present state of crop modelling to assess climate change risks to food production and to which extent crop models comply with IAM demands. Consid...
متن کاملA Novel Integrated Approach to Modelling of Depletion-Induced Change in Full Permeability Tensor of Naturally Fractured Reservoirs
More than half of all hydrocarbon reservoirs are Naturally Fractured Reservoirs (NFRs), in which production forecasting is a complicated function of fluid flow in a fracture-matrix system. Modelling of fluid flow in NFRs is challenging due to formation heterogeneity and anisotropy. Stress sensitivity and depletion effect on already-complex reservoir permeability add to the sophistication. Horiz...
متن کاملA MEMS Capacitive Microphone Modelling for Integrated Circuits
In this paper, a model for MEMS capacitive microphone is presented for integrated circuits. The microphone has a diaphragm thickness of 1 μm, 0.5 × 0.5 mm2 dimension, and an air gap of 1.0 μm. Using the analytical and simulation results, the important features of MEMS capacitive microphone such as pull-in voltage and sensitivity are obtained 3.8v and 6.916 mV/Pa, respectively while there is no...
متن کاملModelling Integrated Multi-item Supplier Selection with Shipping Frequencies
There are many benefits for coordination of multiple suppliers when single supplier cannot satisfy buyer demands. In addition, buyer needs to purchase multiple items in a real supply chain. So, a model that satisfies these requests has many advantages. We extend the existing approaches in the literature that assume all suppliers need to be put on a common replenishment cycle and each supplier ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Environmental Modelling and Software
دوره 17 شماره
صفحات -
تاریخ انتشار 2002