Study of Dislocations in the Minicrystallized Regions in Multicrystalline Silicon Grown by the Directional Solidification Method

نویسندگان

  • Nan Chen
  • Shenyu Qiu
  • Jianhua Huang
  • Guoping Du
  • Guihua Liu
چکیده

Directionally solidified multicrystalline silicon (mc-Si)-based solar cells have dominated the global photovoltaic market in recent years. The photovoltaic performance of mc-Si solar cells is strongly influenced by their crystalline defects. The occurrence of minicrystallization results in much smaller grain size and, therefore, a larger number of grain boundaries in mc-Si ingots. Dislocations in the minicrystallized regions have been rarely investigated in the literature. In this work, optical microscopy was used to investigate dislocations in the mincrystallized regions in mc-Si ingots grown by the directional solidification method. The distribution of dislocations was found to be highly inhomogeneous from one grain to another in the mincrystallized regions. High inhomogeneity of dislocation distribution was also observed in individual grains. Serious shunting behavior was observed in the mc-Si solar cells containing minicrystallized regions, which strongly deteriorates their photovoltaic properties. The shunting was found to be highly localized to the minicrystallized regions.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Direct comparison of the electrical properties of multicrystalline silicon materials for solar cells_ conventional p-type, n-type and high performance p-type

We compare the recombination properties of three important types of multicrystalline silicon wafers for solar cells, namely conventionally-solidified p-type and n-type multicrystalline wafers, and also the recently developed ‘high performance’ p-type multicrystalline wafers. Three distinct regions of the wafers are examined in detail. These are the intra-grain regions, the grain boundaries, and...

متن کامل

Estimation of solidification interface shapes in a boron–phosphorus compensated multicrystalline silicon ingot via photoluminescence imaging

This paper introduces a method for estimating the shape of the solidification front along the height of a directionally-solidified multicrystalline silicon ingot. The technique uses net dopant density images, obtained on wafers via photoluminescence imaging under surface limited conditions, after the impact of grain boundaries is eliminated through an image processing procedure. By modeling the...

متن کامل

A Study of ZnO Buffer Layer Effect on Physical Properties of ITO Thin Films Deposited on Different Substrates

The improvement of the physical properties of Indium Tin Oxide (ITO) layers is quite advantageous in photovoltaic applications. In this study the ITO film is deposited by RF sputtering onto p-type crystalline silicon (c-Si) with (100) orientation, multicrystalline silicon (mc-Si), and glass substrates coated with ZnO and annealed in vacuum furnace at 400°C. Electrical, optical, structural a...

متن کامل

Effects of solar cell processing steps on dislocation luminescence in multicrystalline silicon

We examine the impacts of hydrogenation and phosphorus gettering steps on the deep-level photoluminescence spectra of dislocations and the surrounding regions in multicrystalline silicon wafers, using micro-photoluminescence spectroscopy with micron-scale spatial resolution. We found that the D1 line, originating from secondary defects around dislocation sites, was enhanced significantly after ...

متن کامل

ON THE FORMATION OF STRAY GRAINS IN DIRECTIONALLY-SOLIDIFIED NI-BASED SUPERALLOYS WITH VARYING CROSS SECTIONS

Formation of stray grain defects particularly around re-entrant features of the turbine blade airfoils is one of the major problems in directional and single crystal solidification processes. In this work, directional solidification tests of the GTD-111 Ni-based superalloy were conducted at different withdrawal velocities of 3, 6 and 9 mm.min-1 using various stepped cylindrical and cubic design...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016