A comparative performance analysis of various CMOS design techniques for XOR and XNOR circuits
نویسندگان
چکیده
ABSTRACT : In this paper, we review various design techniques for XOR-XNOR circuits as these circuits are basic building blocks of many arithmetic circuits. The XOR and XNOR circuits can be implemented in different architectures by using different circuit designs. This paper evaluates and compares the performance of various design techniques of XOR-XNOR circuits. The performance of the XOR-XNOR circuits based on TSMC 0.18μm process models at the supply voltage 1.8V is evaluated by the comparison of the simulation results obtained from HSPICE. The XOR and XNOR circuits with feedback transistors design are suitable for arithmetic circuits and other VLSI applications with very low power consumption and a very high speed performance.
منابع مشابه
Comparative Performance Analysis of XOR- XNOR Function Based High-Speed CMOS Full Adder Circuits For Low Voltage VLSI Design
This paper presents comparative study of high-speed, low-power and low voltage full adder circuits. Our approach is based on XOR-XNOR design full adder circuits in a single unit. A low power and high performance 9T full adder cell using a design style called “XOR (3T)” is discussed. The designed circuit commands a high degree of regularity and symmetric higher density than the conventional CMOS...
متن کاملAnalysis of Conventional CMOS and FinFET based 6-T XOR-XNOR Circuit at 45nm Technology
As technology has scaled down, the implications of leakage current and power analysis for memory design have increased. To minimize the short channel effect Double-gate FinFET can be used in place of conventional MOSFET circuits due to the self-alignment of the two gates. Design for XOR and XNOR circuits is suggested to improve the speed and power. These circuits act as basic building blocks fo...
متن کاملRealization of Energy Efficient Logic Circuits Using Adiabatic Technique
The Energy dissipation in conventional CMOS circuits can be minimized through adiabatic technique. By adiabatic technique dissipation in PMOS network can be minimized and some of energy stored at load capacitance can be recycled instead of dissipated as heat. But the adiabatic technique is highly dependent on parameter variation. The intension of the paper is to implement combinational and sequ...
متن کاملNew Design Methodologies for High Speed Low Power XOR-XNOR Circuits
New methodologies for XOR-XNOR circuits are proposed to improve the speed and power as these circuits are basic building blocks of many arithmetic circuits. This paper evaluates and compares the performance of various XOR-XNOR circuits. The performance of the XOR-XNOR circuits based on TSMC 0.18μm process models at all range of the supply voltage starting from 0.6V to 3.3V is evaluated by the c...
متن کاملVoltage Controlled Ring Oscillator Design with Novel 3 Transistors XNOR/XOR Gates
In present work, improved designs for voltage controlled ring oscillators (VCO) using three transistors XNOR/XOR gates have been presented. Supply voltage has been varied from [1.8 1.2] V in proposed designs. In first method, the VCO design using three XNOR delay cells shows frequency variation of [1.900 0.964] GHz with [279.429 16.515] μW power consumption variation. VCO designed with five XNO...
متن کامل