The Best Slalom Competitors - Kinematic Analysis of Tracks and Velocities

نویسندگان

  • Blaž Lešnik
  • Milan Žvan
چکیده

With the help of a kinematic analysis we tried to establish whether the competitors with a shorter line of skiing achieve higher velocities among the slalom gates. The first part of research found out that the competitors who had the shortest lines of skiing in the first analysed turn had, as a rule, the longest lines of skiing in the second turn and vice versa. The shortest line of skiing is therefore not a guarantee for the optimum entry into the next turn. This is confirmed by the negative and statistically insignificant degree of the correlation between the distances of the line of skiing of the competitors at the first and the second pole. On the basis of these findings, it could be claimed that under the present conditions, it is extremely difficult, maybe even impossible, to ski in such a way that the line of skiing would be very short in several successive turns. The second part of the research focused on the establishment of the correlation between the trajectories of the skis and the velocity of skiing of the chosen sample in the measured space (two slalom turns). The calculations of the correlations proved a statistically significant correlation between the average velocity of skiing and the average distance of the length of the line of skiing from the y-axis in the entire measured segment. It was established that the measured space was covered faster by the competitors whose line of skiing was shorter, which means more direct.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Application of Wavelet Neural Network in Forward Kinematics Solution of 6-RSU Co-axial Parallel Mechanism Based on Final Prediction Error

Application of artificial neural network (ANN) in forward kinematic solution (FKS) of a novel co-axial parallel mechanism with six degrees of freedom (6-DOF) is addressed in Current work. The mechanism is known as six revolute-spherical-universal (RSU) and constructed by 6-RSU co-axial kinematic chains in parallel form. First, applying geometrical analysis and vectorial principles the kinematic...

متن کامل

کینماتیک اندام فوقانی در لحظه رهایی تیر در تیراندازان نخبه

Objective: The purpose of this study was to evaluate the kinematics of liberation moment in the elite archers. Methods: Ten elite archers (male = 5, female = 5), who were the members of the provincial and national teams, were studied. The trunk and upper extremities of the subjects were determined by 5 reflective markers. Each archer performed 10 successful trials. Using Motion Analysis System...

متن کامل

Design and Kinematic Analysis of a 4-DOF Serial-Parallel Manipulator for a Driving Simulator

This paper presents the kinematic analysis and the development of a 4-degree-of-freedom serial-parallel mechanism for large commercial vehicle driving simulators. The degrees of freedom are selected according to the target maneuvers and the structure of human motion perception organs. Several kinematic properties of parallel part of the mechanism under study are investigated, including the inve...

متن کامل

The Effect of Side-Cutting Maneuver with and without Anticipating an Increase of Risk Factors of Anterior Cruciate Ligament Injury: Lower Limbs Kinematic Analysis

Background and Aim: Lack of attention to biomechanical parameters during sports maneuvers, especially unpredictable maneuvers can be one of the reasons for athleteschr('39') injuries in sports fields. The aim of this study was to compare the kinematic parameters of the lower limb in side-cutting maneuver with and without anticipation in male football players. Methods: In the present quasi-exper...

متن کامل

An automated time and hand motion analysis based on planar motion capture extended to a virtual environment

In the context of industrial engineering, the predetermined time systems (PTS) play an important role in workplaces because inefficiencies are found in assembly processes that require manual manipulations. In this study, an approach is proposed with the aim to analyze time and motions in a manual process using a capture motion system embedded to a virtual environment. Capture motion system trac...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007