Power Management for Low-Power Battery Operated Portable Systems Using Current-Mode Techniques
نویسندگان
چکیده
منابع مشابه
An Experimental and Comparative Analysis of the Battery Charge Controllers in Off-Grid PV Systems
The study of the battery charge process as the only power storage agent in off-grid systems is of significant importance. The battery charge process has different modes, and the battery in these modes is dependent on the amount of charge. In order to charge the battery in off-grid systems, two charge controllers including Pulse Width Modulation (PWM) and Maximum Power Point Tracker (MPPT) are c...
متن کاملPower Management in Portable Systems Using MAX II CPLDs
Introduction Portable system designers are concerned with minimizing the static and dynamic current draw of all components within a battery-powered system. This application note highlights the very low static and dynamic power capabilities of MAX® II CPLDs. It also reviews circuit design techniques that allow MAX II devices to achieve zero stand-by current. In addition, MAX II devices can be us...
متن کاملMicrocontrollers Improve Power Efficiency of 8051-Based Designs - Application Note - Maxim
High-speed microcontrollers are widely used in portable equipment. With the proper use of a power management mode, the designer can optimize the life of batteries used in today's new systems. This application note looks at ways to reduce power consumption by choosing efficient clock source and clock speed, the use of stop mode, idle mode and burst mode. The Maxim High-Speed Microcontroller and ...
متن کاملA Low-Voltage, Low Quiescent Current, Low Drop-Out Regulator
The demand for low-voltage, low drop-out (LDO) regulators is increasing because of the growing demand for portable electronics, i.e., cellular phones, pagers, laptops, etc. LDO’s are used coherently with dc-dc converters as well as standalone parts. In power supply systems, they are typically cascaded onto switching regulators to suppress noise and provide a low noise output. The need for low v...
متن کاملHigh-side current-sense measurement: Circuits and principles - AN746
This application note describes the use of current sense amplifiers, differential amplifiers and instrumentation amplifiers to measure battery charge and discharge currents in portable equipment, computer notebooks and USB accessories. It compares high side current sense amplifiers with low side differential amplifiers and recommends selection criteria for current sense resistors. A high voltag...
متن کامل