High-resolution Fiber Bragg Grating Sensor System Using Linear-cavity Fiber Laser Scheme
نویسندگان
چکیده
A high-resolution fiber Bragg grating (FBG) sensor system using a linear-cavity fiber laser scheme is proposed and numerically studied. The proposed sensor system can improve the sensing accuracy by using a discriminating FBG pair in conjunction with a fiber laser scheme. This FBG sensor system can resolve the temperature up to 0.0005°C theoretically and can be applied for strain sensing and temperature sensing with high precision. © 2002 Wiley Periodicals, Inc. Microwave Opt Technol Lett 34: 323–325, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop. 10450
منابع مشابه
Ultra-High Sensitive Strain Sensor Based on Post-Processed Optical Fiber Bragg Grating
An ultra-high sensitive strain sensor is proposed. The sensing head, based on the post-processing of a fiber Bragg grating, is used to perform passive and active strain measurements. Both wavelength and full width half maximum dependences with the applied strain are studied for the passive sensor, where maximum sensitivities of 104.1 pm/με and 61.6 pm/με are respectively obtained. When combinin...
متن کاملA Simple Fiber-bragg-grating Sensor System Based on a Linear-cavity Fiber Laser
A simple fiber-Bragg-grating (FBG) sensor system based on a linear-cavity fiber laser is proposed and experimentally demonstrated. The lasing wavelength shift resulting from the temperature variation on this sensing element is discriminated by two FBGs. These two FBGs, acting as wavelength discriminators, are used to increase the real-time measurement range for monitoring the temperature variat...
متن کاملDevelopment of Fiber Bragg Grating Sensor System Using Wavelength-swept Fiber Laser
Fiber Bragg grating (FBG) sensors based on the wavelength division multiplexing technology are ideally suited for structural health monitoring. In many applications, it is desirable to form several arrays of optical fiber sensors to monitor the response of structures. In the present study, we constructed an improved FBG sensor system using a wavelength-swept fiber laser which exhibits high outp...
متن کاملHigh-sensitivity stress sensor based on Bragg grating in BDK-doped photosensitive polymer optical fiber [8351-9]
Bragg grating in a single-mode photosensitive polymer optical fiber (POF) with benzil dimethyl ketal (BDK)-doped in core has been inscribed through the Sagnac ring interference method. The Bragg wavelength of grating is about 1570nm. The stress and strain response of fiber Bragg grating (FBG) has been studied respectively. By fitting the experimental result, the strain sensitivity of FBG in POF...
متن کاملMulti-modes Fiber Ring Laser Sensor Combining One Fiber Bragg Grating Reflector
A multi-longitudinal-mode fiber ring laser sensor is firstly proposed and experimentally demonstrated. Beat frequencies between any two longitudinal modes are used as sensing signal. The core component of the system is a multi-longitudinal-mode fiber ring cavity laser sensor based on beat frequency demodulation method. The theory of beat signal generation and strain measurement are discussed in...
متن کامل