Out with the old, out with the new--The effect of transitions in TVs and monitors technology on consumption and WEEE generation in Sweden 1996-2014.

نویسندگان

  • Yuliya Kalmykova
  • João Patrício
  • Leonardo Rosado
  • P E O Berg
چکیده

The recycling of Waste Electrical and Electronic Equipment (WEEE) is important due to its content of valuable and hazardous compounds. This study investigates the case of the recent technology change within television sets (TVs) and monitors, its impact on the generation of WEEE, and the implications for the recycling industry. In particular, material flow analysis for the time series of 1996-2014 for TVs and monitors by type of technology (CRT, Plasma and LCD) in physical units is combined with empirical data on product lifespans. The number of consumed TVs and monitors has grown exponentially. As a result, despite a 3-fold reduction in the weight of the products, the weight of the corresponding WEEE is also growing exponentially. Out with the old, out with the new - a peak in WEEE from both CRT and flat-screen displays is expected during 2014-2020, due to the simultaneous obsolesce of the last wave of CRT products and the short-lived flat-screen products that substituted the CRTs. The lifespans of LCD and LED TVs were found to be three times shorter than of the CRT TVs, with many TVs discarded while still functional. This is the consequence of two events - replacement of the CRT TVs in combination with lifestyle purchases of TVs, i.e. the premature replacement of flat-screen displays with new sets with extra-large screens and/or new features. The throughput of TVs and monitors consumed has been estimated annually from 2014 until 2040, by quantity and type of device, as well as by component and material type. The annual economic value of the corresponding secondary materials, by material type, has also been estimated. The point in time when the final disposal of CRT products is likely to take place has been identified and should be noted by the recycling industry. Among the important contributions of this study to the accounting and predicting of amounts and types of WEEE are the lifespan distributions, size and weight distributions, and material composition for TVs and monitors of different technology. Directions for method application in other countries are given.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental study of the diesel injector nozzle sediment effect on fuel spray behavior

High pressure amount of fuel in new generation diesel engines’ injector equipped with multiple and small nozzle holes has created significant improvement in the outgoing spray behavior and engine performance. On the other hand, poor fuel quality and injector nozzle embedded in high temperature combustion chamber form fundamental deposits on the nozzle leading to fuel spray inappropriate behavio...

متن کامل

Apprise of Used Electrical and Electronic Equipment in Residential Houses of Citizens of Yazd City and Determination of Their Knowledge, Attitude and Practice Regarding Electronic and Electrical Waste Management

Introduction: The production of Waste Electrical and Electronic Equipment (WEEE) has grown rapidly in recent years. It is necessary to determine the amount of them for its effective management. The aim of this study was to determine the amount of WEEE stored in the houses of Yazd citizens and the level of Knowledge, Attitude and Practice (KAP) of citizens regarding WEEE management. Materials a...

متن کامل

The Sociological Study Factors Effect on Intergenerational Solidarity Phenomenon among Youth(new generation)and Parents(Old Generation

Intergenerational solidarity is and important phenomenon for strengthening  social cohesion and is an important immediate mechanism that has major role in the transfer of knowledge from generation to generation. But the distance between parents and youth, among generations, and this gap exists between the social system, with profound social problems facing the generation gap in the process in t...

متن کامل

Effect of the Nano Particles in the New Generation of Concretes, SCC

Nanotechnology is a favorite research area that revolutionized mechanical and chemical properties of materials. Recently, focusing on concrete as a porous material with micro-scale and nano-scale pores enthusiastic researchers developed their investigations to find out microstructure and mechanical properties of concrete. The aim of this paper is to investigate the effect of nano-silica as an a...

متن کامل

A study on the sub-structure and mechanical properties of friction stir processed AA 6061-T6 joints with ultra-fine grained structure

Ultra-fine grained (UFG) structure (~0.6 µm) was produced in the stir zone (SZ) of 6061-T6 aluminum alloy joints using friction stir processing (FSP) cooled by liquid nitrogen (N2). A new experimental set-up was used to simultaneously quench the lower and upper surfaces of the samples during the processing. In addition, FSPed joints, using a steel backing plate, were produced at room temperatur...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Waste management

دوره 46  شماره 

صفحات  -

تاریخ انتشار 2015