ROMP-Derived cyclooctene-based monolithic polymeric materials reinforced with inorganic nanoparticles for applications in tissue engineering
نویسندگان
چکیده
Porous monolithic inorganic/polymeric hybrid materials have been prepared via ring-opening metathesis copolymerization starting from a highly polar monomer, i.e., cis-5-cyclooctene-trans-1,2-diol and a 7-oxanorborn-2-ene-derived cross-linker in the presence of porogenic solvents and two types of inorganic nanoparticles (i.e., CaCO₃ and calcium hydroxyapatite, respectively) using the third-generation Grubbs initiator RuCl₂(Py)₂(IMesH₂)(CHPh). The physico-chemical properties of the monolithic materials, such as pore size distribution and microhardness were studied with regard to the nanoparticle type and content. Moreover, the reinforced monoliths were tested for the possible use as scaffold materials in tissue engineering, by carrying out cell cultivation experiments with human adipose tissue-derived stromal cells.
منابع مشابه
Progress and Perspective of Antifouling, Pressure Driven, Flat-Sheet Nanocomposite, Polymeric Membranes in Water Treatment
Membrane filtration, especially based on the size exclusion phenomenon, has long been established due to its abilities to addressing the growing demands of the clean water of the world’s population. However, widespread applications of the membranes face several challenges including chemical vulnerability, thermal deterioration, and biological degradation of the membranes that transpire while re...
متن کاملInfluence of Solution Temperature and pH on Size and Morphology Improvement of Chitosan Nanoparticles as Protein Delivery Vehicles
In recent years, utilization of chitosan /tripolyphosphate nanoparticles has been considered greatly as protein delivery vehicles. Effects of a variety of factors on final characteristics of nanoparticles have been studied by many investigators. Although, the objective of this study was to achieve smaller chitosan nano carriers via changing fabrication parameters such as pH and temperature and ...
متن کاملInfluence of Solution Temperature and pH on Size and Morphology Improvement of Chitosan Nanoparticles as Protein Delivery Vehicles
In recent years, utilization of chitosan /tripolyphosphate nanoparticles has been considered greatly as protein delivery vehicles. Effects of a variety of factors on final characteristics of nanoparticles have been studied by many investigators. Although, the objective of this study was to achieve smaller chitosan nano carriers via changing fabrication parameters such as pH and temperature and ...
متن کاملSynthesis and characterization of fiber reinforced polymer scaffolds based on natural fibers and polymer for bone tissue engineering application
A wide range of materials and scaffolding fabrication methods for bone tissue engineering have beenexplored recently. Fiber reinforced polymers (FRP) system appears to be a suitable system. By the exclusiveuse of biocompatible or bio-absorbable polymers and fibers, novel generation of scaffolds for applicationsin tissue engineering can be prepared. Mulberry Silk as highlighted...
متن کاملMagnetic Field Effects on the Elastic Behavior of Polymeric Piezoelectric Cylinder Reinforced with CNTs
In the present study, the magnetic field effects of the elastic response of the polymeric piezoelectric cylinder reinforced with the carbon nanotubes (CNTs) are studied. The cylinder is subjected to an internal pressure, a constant electric potential difference at the inner and outer surfaces, and the thermal and magnetic fields. The Mori-Tanaka model is used for obtaining the equivalent materi...
متن کامل