Hierarchical SnO2@SnS2 Counter Electrodes for Remarkable High-efficiency Dye-sensitized Solar Cells
نویسندگان
چکیده
A hierarchical SnO2@SnS2 core-shell nanostructure has been prepared by in situ surface sulfurization of hollow SnO2 sphere via a facile two-step solution-based method and used as a substitute for conventional Pt counter electrode (CE) for dye-sensitized solar cells (DSSCs) for the first time. The resulted semitransparent SnO2@SnS2 CEs demonstrate a high electrical conductivity and excellent catalytic activity, which are attributed to the synergetic effect of each component in such hierarchical nanostructure. The hierarchical SnO2@SnS2 CE achieves an impressive photovoltaic conversion efficiency (PCE) of 8.08%, which is significantly higher than those of individual SnO2 (5.26%) and SnS2 (6.00%) and also higher than Pt (7.88%) by 2.5%. This study suggests that the inexpensive hierarchical SnO2@SnS2 CE is a good alternative to the expensive Pt CE in DSSCs. ã 2015 Elsevier Ltd. All rights reserved.
منابع مشابه
High catalytic activity and stability of nickel sulfide and cobalt sulfide hierarchical nanospheres on the counter electrodes for dye-sensitized solar cells.
In situ grown nickel sulfide and cobalt sulfide hierarchical nanospheres on F-doped SnO2 (FTO) substrates exhibited comparable catalytic activities to sputtering Pt on the counter electrodes for dye-sensitized solar cells (DSSCs). The fresh cells with the nickel sulfide and cobalt sulfide on the counter electrodes could reach power conversion efficiencies of 6.81% and 6.59% respectively, approa...
متن کاملComparison of Transparent Nickel Doped Cobalt Sulfide and Platinum Counter Electrodes Used in Quasi-Solid State Dye Sensitized Solar Cells
Transparent nickel doped cobalt sulfide was fabricated on a SnO2:F electrode and tested as an efficient electrocatalyst and as an alternative to the expensive platinum counter electrode. In order to investigate how this electrode could affect the electrical characteristics of a dye-sensitized solar cell, we manufactured cells with the same TiO2 photoanode sensitized with dye (N719) and employin...
متن کاملInfluence of nanostructured TiO2 film thickness on photoelectrode structure and performance of flexible Dye- Sensitized Solar Cells
A commercial Ti-Nanoxide was deposited on In-doped SnO2 (ITO) polymer substrates by tape casting technique with different thicknesses (7, 14 and 36μm) to be used as photoelectrode in flexible dye-sensitized solar cells (DSSCs). Ruthenium dye was adsorbed on each TiO2 film for 24 h. The resulting photoelectrodes were used to form flexible DSSCs in combination with...
متن کاملRecent development of carbon nanotubes materials as counter electrode for dye-sensitized solar cells
Dye-sensitized solar cells present promising low-cost alternatives to the conventional Silicon (Si)-based solar cells. The counter electrode generally consists of Pt deposited onto FTO plate. Since Pt is rare and expensive metal, nanostructured carbonaceous materials have been widely investigated as a promising alternative to replace it. Carbon nanotubes have shown significant properties such...
متن کاملCharge transfer resistance of spray deposited and compressed counter electrodes for dye-sensitized nanoparticle solar cells on plastic substrates
Electrochemical impedance spectroscopy was used to determine the effective charge transfer resistances of porous dye-sensitized solar cell counter electrodes prepared by low-temperature spray deposition and compression of conductive carbon and platinized Sb-doped SnO2 powders on indium tin oxide-coated plastic substrates. The charge transfer resistances were 0.5–2 and 8–13O cm, respectively, wh...
متن کامل