A Modified Perturb and Observe Maximum Power Point Tracking Technique for Single-Stage Grid-Connected Photovoltaic Inverter
نویسنده
چکیده
There is an inherent tracking-oscillations trade-off problem in Perturb and Observe (P&O) maximum power point tracking (MPPT) technique for photovoltaic (PV) system. Higher perturbation step-size increases the tracking speed at the cost of greater oscillations around maximum power point (MPP); whereas, smaller step-size slows down the tracking while reducing the oscillations around MPP. In this paper, a modification in P&O method is proposed to reduce this tracking-oscillations trade-off problem by setting an initial approximate perturbation value whenever irradiance changes and continuing tracking with adaptive stepsize. Detail simulation results of the modified P&O method are presented and compared with the results obtained considering different values of fixed step sizes. The P&O method with the proposed modifications clearly shows maximum tracking speed with minimum oscillations around MPP. Moreover, due to the modifications, the algorithm can track MPP efficiently in case of sudden irradiance change. Key-Words: -Photovoltaic (PV), Perturb and Observe (P&O), Maximum Power Point Tracking (MPPT), Gridconnected PV, Inverter, Modulation Index, Phase Angle.
منابع مشابه
Design of Maximum Power Point Tracking in Solar Array Systems Using Fuzzy Controllers
In recent year's renewable energy sources have become a useful alternative for the power generation. The power of photovoltaic is nonlinear function of its voltage and current. It is necessary to maintain the operation point of photovoltaic in order to get the maximum power point (MPP) in various solar intensity. Fuzzy logic controller has advantage in handling non-linear system. Maximum power ...
متن کاملEvaluating Technical Requirements to Achieve Maximum Power Point in Photovoltaic Powered Z-Source Inverter
One of the key challenges of employing photovoltaic systems is to extract maximum power of the panels. This problem is known as maximum power point tracking (MPPT) technique. The MPPT stands for establishing situation in which output power of the panels reaches its maximum allowable power. In this context, this paper is to assess the technical requirements to achieve maximum output power of a n...
متن کاملNovel application of hybrid Perovskite materials in grid-connected photo-voltaic cells
In this paper, the novel application of organic/inorganic perovskite hybrid materials isproposed for grid-connected Photo-voltaic (PV) cells. The perovskite hybrid cells attracted a lot of interest due to their potential in combining advantages of both components. Looking to the future, there is no doubt that these new generations of hybrid materials, born from the very fruitful activitie...
متن کاملA Grid-connected PV Power Supply based on Flying Capacitor multicell converter with modified MPPT based Control for Active Power Filtering
This paper presents a grid connected photovoltaic system, which acts as both power generator and active power filter (APF), based on Flying Capacitor Multicell (FCM) converter. Increase in the number of output voltage levels, natural self-balancing of flying capacitors and dc link voltage and lower power rating of components are the main futures of FCM converter compared with conventional multi...
متن کاملA Grid-connected PV Power Supply based on Flying Capacitor multicell converter with modified MPPT based Control for Active Power Filtering
This paper presents a grid connected photovoltaic system, which acts as both power generator and active power filter (APF), based on Flying Capacitor Multicell (FCM) converter. Increase in the number of output voltage levels, natural self-balancing of flying capacitors and dc link voltage and lower power rating of components are the main futures of FCM converter compared with conventional multi...
متن کامل