Fiber Optic Temperature Sensor Design based on Fluorescent Lifetime
نویسندگان
چکیده
The temperature is measured by the fluorescent lifetime of fluorescent material. In this work, the analog switch was controlled by single chip to trigger exciting light emission of LED. In order to measure the fluorescent lifetime, photoelectric detector, amplifier and active power filter were used. The modulation frequency of fluorescent signal was detected by phase locking detection method. Therefore, the temperature measurement in the range of 0°C~450°C was realized. This sensor has advantages such as high accuracy, strong anti-electromagnetic interference and non-contact measurement.
منابع مشابه
A fiber optic sensor for measuring glucose in aqueous solutions
In this paper, the set-up of a multi-mode fiber optic sensor for measuring glucose in aqueous solutions is investigated and evaluated. The basis of this sensor is based on the Fresnel Reflection. In this setup, a helium-neon laser is used as a light source, a fiber optic probe, photocell as detector and a digital multimeter. The statistical analysis of the recorded data shows a highly linear be...
متن کاملFiber-Optic Fluorescence Carbon Dioxide Sensor for Environmental Monitoring
Fiber-optic sensors were developed for monitoring dissolved carbon dioxide in water samples in the 0 to 900 ppm concentration range. A pH-sensitive fluorescent dye (HPTS) was reacted with a cationic quaternary ammonium salt to form an ion pair which was electrostatically bound to the surface of particles of aminocellulose which then were dispersed into a gas-permeable silicone polymer. The gree...
متن کاملDual temperature and strain measurement with the combined fluorescence lifetime and Bragg wavelength shift approach in doped optical fiber.
We have constructed fiber-optic sensors to measure temperature and strain by combining the properties of fiber Bragg gratings with the fluorescent lifetimes of various doped fibers. Sensors have been made with the fiber Bragg grating written directly into the doped fiber to ensure the collocation of the strain and temperature measurement points. Results are compared with those obtained previous...
متن کاملTemperature Dependent Signal-to-noise Ratio and Sensitivity of a Surface Plasmon Resonance Based Fiber Optic Sensor
In the present paper, a theoretical analysis for predicting the effect of temperature on the performance of a fiber optic SPR sensor has been carried out. The sensor configuration is a three layer Krestchmann configuration consisting of fiber core, thin metallic layer, and bulk sensing layer. The optical fiber considered is a multimoded fiber. The effect of temperature is included in terms of t...
متن کاملA Temperature Sensor Based on a Polymer Optical Fiber Macro-Bend
The design and development of a plastic optical fiber (POF) macrobend temperature sensor is presented. The sensor has a linear response versus temperature at a fixed bend radius, with a sensitivity of . The sensor system used a dummy fiber-optic sensor for reference purposes having a resolution below 0.3 °C. A comprehensive experimental analysis was carried out to provide insight into the effec...
متن کامل