Thermal Conductivity and Thermal Expansion Coefficient of Gfrp Composite Laminates with Fillers
نویسندگان
چکیده
This research paper compares the thermal conductivity and thermal expansion coefficients of glass fiber reinforced epoxy composite laminates (GFRP laminates) made using the Hand layup technique. The composite laminates were fabricated by filling with varying concentrations of fly ash, stone powder, aluminium oxide (Al2O3), magnesium hydroxide (Mg (OH)2), Silicon carbide particles(SiC) and hematite powder. The test results show that fly ash filled GFRP laminate exhibited low thermal conductivity. GFRP laminates filled with SiC exhibited maximum thermal conductivity and minimum thermal expansion coefficient.
منابع مشابه
Silver Nanoparticle-Deposited Boron Nitride Nanosheets as Fillers for Polymeric Composites with High Thermal Conductivity
Polymer composites with high thermal conductivity have recently attracted much attention, along with the rapid development of the electronic devices toward higher speed and performance. However, a common method to enhance polymer thermal conductivity through an addition of high thermally conductive fillers usually cannot provide an expected value, especially for composites requiring electrical ...
متن کاملThrough-thickness thermal conduction in glass fiber polymer–matrix composites and its enhancement by composite modification
Continuous glass fiber polymer–matrix composites are electrically insulating and used for printed wiring boards, but their thermal conductivity needs to be increased without sacrificing the electrical insulation ability. The through-thickness thermal conductivity of these epoxy–matrix composite laminates with in-plane fibers is found to be effectively modeled using the Rule of Mixtures with fib...
متن کاملInorganic Nanoparticle-Modified Poly(Phenylene Sulphide)/Carbon Fiber Laminates: Thermomechanical Behaviour
Carbon fiber (CF)-reinforced high-temperature thermoplastics such as poly(phenylene sulphide) (PPS) are widely used in structural composites for aerospace and automotive applications. The porosity of CF-reinforced polymers is a very important topic for practical applications since there is a direct correlation between void content and mechanical properties. In this study, inorganic fullerene-li...
متن کاملThe use of polyimide-modified aluminum nitride fillers in AlN@PI/Epoxy composites with enhanced thermal conductivity for electronic encapsulation
Polymer modified fillers in composites has attracted the attention of numerous researchers. These fillers are composed of core-shell structures that exhibit enhanced physical and chemical properties that are associated with shell surface control and encapsulated core materials. In this study, we have described an apt method to prepare polyimide (PI)-modified aluminum nitride (AlN) fillers, AlN@...
متن کاملTransient Natural Convection in an Enclosure with Variable Thermal Expansion Coefficient and Nanofluid Properties
Transient natural convection is numerically investigated in an enclosure using variable thermal conductivity, viscosity, and the thermal expansion coefficient of Al2O3-water nanofluid. The study has been conducted for a wide range of Rayleigh numbers (103≤ Ra ≤ 106), concentrations of nanoparticles (0% ≤ ϕ ≤ 7%), the enclosure aspect ratio (AR =1), and temperature differences between the cold a...
متن کامل