Understanding the Effect of Additives in Li-ion and Li-Sulfur Batteries by Operando ec- (S)TEM
نویسندگان
چکیده
1. Joint Center for Energy Storage Research (JCESR), Pacific Northwest National Laboratory (PNNL), Richland, WA 99352, USA. 2. Physical and Computational Science Directorate, PNNL, Richland, WA 99352, USA. 3. National Security Directorate, PNNL, Richland, WA 99352, USA. 4. Energy and Environmental Directorate, PNNL, Richland, WA 99352, USA. 5. Industrial and Manufacturing Engineering, Florida State University, Tallahassee, FL 32306, USA. 6. Environmental Molecular Sciences Laboratory, PNNL, Richland, WA 99352, USA. 7. Department of Chemistry, Penn State University, University Park, PA, 16802, USA. 8. Materials Science and Engineering, University of Washington, Seattle, WA 98195, USA.
منابع مشابه
Understanding the Effect of Additives in Li-Sulfur Batteries by Operando ec- (S)TEM
Joint Center for Energy Storage Research (JCESR), PNNL, Richland, WA, USA Physical and Computational Science Directorate, PNNL, Richland, WA, USA Energy and Environmental Directorate, PNNL, Richland, WA, USA Dept.Industrial & Manufacturing Engineering, Florida State University, Tallahassee, FL, USA Department of Chemical Engineering and Materials Science, University of California, Davis, CA, US...
متن کاملImproving the performance of Lithium-Sulfur Batteries using Sulfur-(TiO2/SiO2) yolk–shell Nanostructure
Lithium-Sulfur (Li-S) batteries are considered as one of the promising candidates for next-generation Li batteries in near future. Although, these batteries are suffering from certain drawbacks such as rapid capacity fading during the charge and discharge process due to the dissolution of polysulfides. In this paper, Sulfur/metal oxide (TiO2 and SiO2) yolk–shell structures have been successfull...
متن کاملVoltage increase of aqueous lithium-ion batteries by Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic
In this research, a lithium ion conducting lithium aluminum germanium phosphate (LAGP) glass-ceramic with a formula of Li1.5Al0.5Ge1.5(PO4)3 was synthesized by melt-quenching method and subsequent crystallization at 850 °C for 8 h. The prepared glass-ceramic was characterized using X-ray diffraction analysis (XRD) and field emission scanning electron microscopy (FESEM). The XRD patterns exhib...
متن کاملSnO2 Nanowires on Carbon Nanotube Film as a High Performance Anode Material for Flexible Li-ion Batteries
Today, Li-ion batteries (LIBs) are the most common rechargeable batteries used in electronic devices. SnO2 with theoretical specific capacity of 782 mAh/g is among the best anode materials for LIBs. In this report, Three-dimensional SnO2 nanowires (NWs) on carbon nanotube (CNT) thin film (SnO2 / CNT) is fabricated using a combination of vacuum filtration and thermal evaporation techniques. The ...
متن کاملGravimetric and volumetric energy densities of lithium-sulfur batteries
Lithium-sulfur (Li-S) batteries receive considerable attention as a potential alternative to lithium-ion batteries (LIBs) due to their high theoretical gravimetric energy density ( E g ). However, their volumetric energy density ( E v ), which is also very important for practical applications is often neglected to emphasize their superior gravimetric energy density. In this review, we will try ...
متن کامل