Sources of Vertical Vibration Generating Dynamic Loads in the Naval Beams
نویسندگان
چکیده
The main reason causing general stabilized hall vibration is the main mechanisms functioning, and periodic variation of hydrodynamic pressure force that strains the plating of the ship. This hydrodynamic pressure reaches maximum strain around the propellers zone. General vibration of the hall cause local vibrations of different parts of the ship since general vibrations causes movement of support structures of the hull. In some cases considerable local vibrations are caused by the auxiliary mechanisms, especially of those having pistons. Auxiliary mechanisms functioning in unfavorable conditions may cause general vibrations, too.
منابع مشابه
Vibration Analysis of Beams Traversed by a Moving Mass
A detailed investigation into the analysis of beams with different boundary conditions. carrying either a moving mass or force is performed. Analytical and numerical techniques for determination of the dynamic behavior of beams due to a concentrated travelling force or mass are presented. The transformation of the familiar Euler-Bernoulli thin beam equation into a series of ordinary differentia...
متن کاملDynamic Response Analysis of Fractionally Damped Beams Subjected to External Loads using Homotopy Analysis Method
This paper examines the solution of a damped beam equation whose damping characteristics are well-defined by the fractional derivative (FD). Homotopy Analysis Method (HAM) is applied for calculating the dynamic response (DR). Unit step and unit impulse functions are deliberated for this analysis. Acquired results are illustrated to show the movement of the beam under various sets of parameters ...
متن کاملDynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach
The present study is the first to analyze the dynamic response of a poroelastic beam subjected to a moving force. Moreover, the influences of attached mass-spring systems and non-ideal supports (with local movements in the supporting points or base due to the presence of factors such as gaps, unbalanced masses, and friction or seismic excitations) on the responses were investigated. Non-ideal s...
متن کاملOptimal Nonlinear Energy Sinks in Vibration Mitigation of the Beams Traversed by Successive Moving Loads
Optimal Nonlinear Energy Sink (NES) is employed in vibration suppression of the beams subjected to successive moving loads in this paper. As a real application, a typical railway bridge is dynamically modeled by a single-span beam and a traveling high-speed train is simulated by a series of successive moving loads. Genetic algorithm is employed as the optimization technique and optimal paramete...
متن کاملبررسی عملکرد جاذبهای دینامیکی خطی و غیرخطی برای تیرهای در معرض بارهای درحال حرکت
The present work studies the performance of linear and nonlinear dynamic vibration absorbers mounted on Euler–Bernoulli beams subjected to moving loads. Absorbers used in this work consist of one mass, two springs and one linear damper.The springs may be considered either linear or non-linear. The objective is to compare the performance of these absorbers with classical dynamic and nonlin...
متن کامل