New Bicomponent Binders for Foundry Moulding Sands Composed of Phenol-furfuryl Resin and Polycaprolactone
نویسنده
چکیده
The aim of this article is to test the properties of foundry moulding sands with a new bicomponent organic binder. The new binder is the composition of phenol-furfuryl resin, commonly used in foundry practice and biodegradable material – polycaprolactone. The paper presents the research of strength properties, thermal destruction and thermal deformation of moulding sands with a new bicomponent binder. It was proved that inserting polycaprolactone to phenol-furfuryl resin did not lower the strength properties of tested moulding sands. The new additive did not affect the moulding sands thermal degradation but it changed their thermal deformation course.
منابع مشابه
Influence of a Reclaimed Sand Addition to Moulding Sand with Furan Resin on Its Impact on the Environment
Metalcasting involves having a molten metal poured in a hollow mould to produce metal objects. These moulds are generally made of sand and are chemically bonded, clay-bonded, or even unbounded. There are many binder systems used. Binders based on furfuryl resins constitute currently the highest fraction in the binders no-bake group. Moulding sand, after knocking out the cast, is partially recla...
متن کاملNEW BioCo BINDERS CONTAINING BIOPOLYMERS FOR FOUNDRY INDUSTRY
B. Grabowska, M. Holtzer, R. Dańko, M. Górny, A. Bobrowski, E. Olejnik; AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland Possibilities of cross-linking of new polymer binders from the BioCo group, their hardening in moulding sands at the application of cross-linking agents both physical and chemical are presented. Their thermal stability was determined. I...
متن کاملRespiratory disease in foundry workers.
A survey was carried out in a steel foundry in Brisbane to evaluate the nature and frequency of respiratory symptoms and to assess ventilatory function. The foundry used many moulding processes including the Furane, Isocure, Shell, carbon dioxide, and oil sand systems. Nasal symptoms and wheeze were often reported, particularly by workers in the general foundry and core shop, and on a semiautom...
متن کاملPyrolysis of foundry sand resins: a determination of organic products by mass spectrometry.
Pyrolysis-gas chromatography-mass spectrometry (MS) was used to identify the major organic products produced by pyrolysis of three foundry sand resins: (i) Novolac and (ii) phenolic urethane (PU) (both phenol-formaldehyde based resins) and (iii) furan (furfuryl alcohol based resin). These resins are used in the metal casting industry as a "sand binder" for making cores (used to produce cavities...
متن کاملPotential of the Application of the Modified Polysaccharides Water Solutions as Binders of Moulding Sands
K. Kaczmarska, B. Grabowska, D. Drożyński, AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland The results of preliminary tests of selected properties of the moulding sands with the binder in the form of a 5 % water solution of the sodium salt of carboxymethyl starch (with a degree of substitution (DS) of 0,2 and 0,87) are presented in this study. The mouldi...
متن کامل