Photoelectrochemical Tandem Cell with Bipolar Dye-Sensitized Electrodes for Vectorial Electron Transfer for Water Splitting
نویسندگان
چکیده
Direct water electrolysis was achieved with a novel monolithic photoelectrochemical cell. Bipolar WO3/Pt and dye-sensitized TiO2/Pt semiconductor panels, capable of vectorial electron transfer, have been used for water splitting to yield hydrogen and oxygen; light is the only energy input. The hydrogen production efficiency of this tandem cell, based on the short-circuit current, was 1.9% and the maximum hydrogen production efficiency was 2.5% when 0.2 V positive bias was applied. When a concentrated LiCl aqueous solution was used as an electrolyte, valuable chlorine was obtained instead of oxygen. The maximum yielding efficiency of hydrogen and chlorine was 1.8%. © 2005 The Electrochemical Society. DOI: 10.1149/1.2140497 All rights reserved.
منابع مشابه
Photovoltage Effects of Sintered IrO2 Nanoparticle Catalysts in Water-Splitting Dye-Sensitized Photoelectrochemical Cells
Water-splitting dye-sensitized photoelectrochemical cells (WSDSPECs) utilize high surface area TiO2 electrodes functionalized with light absorbing sensitizers and water oxidation catalysts. Because water splitting requires vectorial electron transfer from the catalyst to the sensitizer to the TiO2 surface, attaching both sensitizer and catalyst to TiO2 in the correct sequence and stabilizing th...
متن کاملImproving the efficiency of water splitting in dye-sensitized solar cells by using a biomimetic electron transfer mediator.
Photoelectrochemical water splitting directly converts solar energy to chemical energy stored in hydrogen, a high energy density fuel. Although water splitting using semiconductor photoelectrodes has been studied for more than 40 years, it has only recently been demonstrated using dye-sensitized electrodes. The quantum yield for water splitting in these dye-based systems has, so far, been very ...
متن کاملDynamics of Electron Injection in SnO2/TiO2 Core/Shell Electrodes for Water-Splitting Dye-Sensitized Photoelectrochemical Cells.
Water-splitting dye-sensitized photoelectrochemical cells (WS-DSPECs) rely on photoinduced charge separation at a dye/semiconductor interface to supply electrons and holes for water splitting. To improve the efficiency of charge separation and reduce charge recombination in these devices, it is possible to use core/shell structures in which photoinduced electron transfer occurs stepwise through...
متن کاملProton-Induced Trap States, Injection and Recombination Dynamics in Water-Splitting Dye-Sensitized Photoelectrochemical Cells.
Water-splitting dye-sensitized photoelectrochemical cells (WS-DSPECs) utilize a sensitized metal oxide and a water oxidation catalyst in order to generate hydrogen and oxygen from water. Although the Faradaic efficiency of water splitting is close to unity, the recombination of photogenerated electrons with oxidized dye molecules causes the quantum efficiency of these devices to be low. It is t...
متن کاملDynamics of Electron Recombination and Transport in Water- Splitting Dye-Sensitized Photoanodes
Water-splitting dye-sensitized photoelectrochemical cells (WS-DSPECs) use visible light to split water using molecular sensitizers and water oxidation catalysts codeposited onto mesoporous TiO2 electrodes. Despite a high quantum yield of charge injection and low requirement for the catalytic turnover rate, the quantum yield of water splitting in WS-DSPECs is typically low (<1%). Here we examine...
متن کامل