Fluorescence of Ti(3+) ions thermally diffused into sapphire.

نویسندگان

  • L M Hickey
  • E Martins
  • J E Román
  • W S Brocklesby
  • J S Wilkinson
چکیده

The thermal diffusion of Ti(3+) ions into sapphire is demonstrated, and the spectroscopic characteristics of the locally doped region are presented. The spectral line shape, polarization dependence, and excited-state lifetime of indiffused Ti:sapphire are in excellent agreement with previously published data for high-quality, bulk-doped Ti:sapphire laser crystals. The observed diffusion rate at 1950 degrees C is of the order of D = 10(-14) m(2) s(-1). These results represent a significant step in the development of a versatile broadly tunable waveguide laser based on the Ti(3+):sapphire material system established for conventional bulk lasers.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Characterisation of Ti:diffused Channel Waveguides in Sapphire

The development of Ti:difmsed channel waveguides in sapphire is demonstrated and their characteristics discussed with a view to the development of a Ti:sapphire waveguide laser. Introduction The development of a Ti:sapphire waveguide laser would have significant impact as a versatile, compact source in portable instrumentation for applications in sensing and spectroscopy. In the bulk configurat...

متن کامل

Shallow implantation of Ti ions in sapphire [ a - Al 2 O 3 ( 0 0 0 1 ) ]

Sapphire single crystal [a-Al2O3(0 0 0 1)] samples were treated by irradiation with Ti‡ ions in the energy range 0.5±7.0 keV at 25°C and 750°C under UHV conditions for total doses of 10 Ti‡/cm2. These Ti treated sapphire samples were studied by ex situ X-ray photoelectron spectroscopy (XPS) depth pro®ling and by atomic force microscopy (AFM). Aluminum in the oxidation states Al0;3‡;x‡, where 0 ...

متن کامل

Sapphire and Ti:sapphire Buried Waveguide Structures

Due to its excellent thermal, mechanical, and optical properties, sapphire is one of the most suitable material for integrated optical devices. Although this hard crystalline material is particularly difficult to process, fabrication of Ti-doped sapphire surface channel waveguides by surface structuring [1,2] of planar waveguides or ion in-diffusion [3] has been demonstrated. Generally, device ...

متن کامل

Ytterbium-Doped Glass Waveguide Laser Fabricated by Ion Exchange

A ytterbium-doped, glass, channel waveguide laser, fabricated by ion exchange, is reported. The 2.2-cm long device, using broad-band 4% output couplers, lased in the vicinity from 1020 to 1030 nm when pumped by a Ti : sapphire laser operating at 910 nm. A lasing threshold of 50 mW (launched pump) and a slope efficiency of 5% were measured. Device parameters, including fluorescence lifetimes, em...

متن کامل

Engineering interface-type resistive switching in BiFeO3 thin film switches by Ti implantation of bottom electrodes

BiFeO3 based MIM structures with Ti-implanted Pt bottom electrodes and Au top electrodes have been fabricated on Sapphire substrates. The resulting metal-insulator-metal (MIM) structures show bipolar resistive switching without an electroforming process. It is evidenced that during the BiFeO3 thin film growth Ti diffuses into the BiFeO3 layer. The diffused Ti effectively traps and releases oxyg...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Optics letters

دوره 21 8  شماره 

صفحات  -

تاریخ انتشار 1996