Electrochemical behaviour of pyridostigmine bromide-an anticolinergic drug at polyaniline/polypyrrole composite polymer electrode
نویسندگان
چکیده
A composite polymer surface coated on a tin oxide offers dramatic improvement in the stability and sensitivity of voltammetric measurement of pyridostigmine bromide as compared to individual tin oxide, polyaniline or polypyrrole coated electrode. A linear current response was achieved with a detection limit of 1x10 M. The stability and morphology of the polymer surfaces were determined by thermogravimetry and scanning electron microscopy respectively. The results suggest that composite polymer electrode is the best detector for pyridostigmine bromide (PB) at lower concentration.
منابع مشابه
FABRICATION AND CHARACTERIZATION OF POLYANILINE-GRAPHENE COMPOSITE AS ELECTRODE IN ELECTROCHEMICAL CAPACITOR
In this study, polyaniline-graphene composites with different nano-structures are synthesized and the behaviour of the obtained composites serving as electrode materials in electrochemical capacitors is studied. The morphology, crystal structure, and thermal stability of the composites are examined using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Thermal gravimetric analys...
متن کاملConducting Polymer 3D Microelectrodes
Conducting polymer 3D microelectrodes have been fabricated for possible future neurological applications. A combination of micro-fabrication techniques and chemical polymerization methods has been used to create pillar electrodes in polyaniline and polypyrrole. The thin polymer films obtained showed uniformity and good adhesion to both horizontal and vertical surfaces. Electrodes in combination...
متن کاملElectrochemical thin film deposition of polypyrrole on different substrates
Polypyrrole is one of the important conductive polymers that are widely used in energy storage systems, biosensors and electronics. The electrochemical synthesis of polypyrrole has advantages of simple process, mass production and low cost. In this study, polypyrrole thin films were deposited on different electrode substrates by cyclovoltammetric (CV), galvanostatic and potentiostatic depositio...
متن کاملElectrochemical fabrication of polypyrrole nanofibers and their characterization
Polypyrrole (PPy) nanofibers have been fabricated on glassy carbon electrode (GCE) usingelectrochemical technique. Electropolymerization of pyrrole (Py) for the fabrication of PPy nanofiberswas occurred on GCE by applying a fixed potential of about 0.85 V for 120 sec in a mild basic solutioncontaining sodium carbonate and sodium perchlorate. In the mild basic media, the monomer, Py, isoxidized ...
متن کاملAn Amperometric Biosensor for Uric Acid Determination Prepared From Uricase Immobilized in Polyaniline-Polypyrrole Film
A new amperometric uric acid biosensor was developed by immobilizing uricase by a glutaraldehyde crosslinking procedure on polyaniline-polypyrrole (pani-ppy) composite film on the surface of a platinum electrode. Determination of uric acid was performed by the oxidation of enzymatically generated H₂O₂ at 0.4 V vs. Ag/AgCl. The linear working range of the biosensor was 2.5×10-6 - 8.5×10-5 M and ...
متن کامل