A new reconstruction method based on the volume-based approach
نویسندگان
چکیده
When using volume-based approach to reconstruct 3D model by engineering drawings, some lost projection lines of a primitive feature parts will result in incorrect recognitions of a complex part, so preprocess of engineering drawings will be necessary. The approach presented in this paper proposes an iterative procedure of pattern recognition and projection mending. By the process, feature parts will be recognized easily with their integrated information.
منابع مشابه
A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings
There are mainly two categories for a 3D reconstruction from 2D drawings: B-Rep and CSG that both these methods have serious weaknesses despite being useful. B-Rep method which has been older and have wider function range is problematic because of high volume of calculations and vagueness in answers and CSG method has problem in terms of very limited range of volumes and drawings that it can an...
متن کاملIndividual virtual phantom reconstruction for organ dosimetry based on standard available phantoms
Background: In nuclear medicine application often it is required to use computational methods for evaluation of organ absorbed dose. Monte Carlo simulation and phantoms have been used in many works before. The shape, size and volume in organs are varied, and this variation will produce error in dose calculation if no correction is applied. Materials and Methods: A computational framewo...
متن کاملNumerical Simulation of the Hydrodynamics of a Two-Dimensional Gas—Solid Fluidized Bed by New Finite Volume Based Finite Element Method
n this work, computational fluid dynamics of the flow behavior in a cold flow of fluidized bed is studied. An improved finite volume based finite element method has been introduced to solve the two-phase gas/solid flow hydrodynamic equations. This method uses a collocated grid, where all variables are located at the nodal points. The fluid dynamic model for gas/solid two-phase flow is based on ...
متن کاملReconstruction of Data Gaps in Total-Ozone Records with a New Wavelet Technique
This study introduces a new technique to fill and reconstruct daily observational of Total Ozone records containing void data for some days based on the wavelet theory as a linear time-frequency transformation, which has been considered in various fields of science, especially in the earth and space physics and observational data processing related to the Earth and space sciences. The initial c...
متن کاملBlock-Based Compressive Sensing Using Soft Thresholding of Adaptive Transform Coefficients
Compressive sampling (CS) is a new technique for simultaneous sampling and compression of signals in which the sampling rate can be very small under certain conditions. Due to the limited number of samples, image reconstruction based on CS samples is a challenging task. Most of the existing CS image reconstruction methods have a high computational complexity as they are applied on the entire im...
متن کاملSalting out and vortex-assisted dispersive liquid–liquid microextraction based on solidification of floating organic drop microextraction as a new approach for simultaneous determination of phenol and chlorophenols in water samples
In the present research, salting out and vortex assisted dispersive liquid–liquid microextraction based on solidification of floating organic drop microextraction (SO-VADLLME-SFODME) for the extraction and determination of phenol and chlorophenols in water samples followed by HPLC have been studied through a novel, simple, low-cost, selectable and environment friendly (so called green) method....
متن کامل