Combustion synthesis of calcium phosphate bioceramic powders
نویسنده
چکیده
Calcium phosphate (hydroxyapatite and tri-calcium phosphate) bioceramics closely resembling, in chemical composition, those found in vivo in human bones have been synthesized by using novel synthetic body ̄uid solutions via the self-propagating combustion synthesis (SPCS) method. Powder characterization was performed by XRD, ICP-AES, FTIR and SEM. # 2000 Elsevier Science Ltd. All rights reserved.
منابع مشابه
Microwave-assisted synthesis of calcium phosphate nanowhiskers
Calcium phosphate [single-phase hydroxyapatite (HA), single-phase tricalcium phosphate (TCP), and biphasic HA-TCP] nanowhiskers and/or powders were produced by using a novel microwave-assisted “combustion synthesis (auto ignition)/molten salt synthesis” hybrid route. This work is an example of our “synergistic processing” philosophy combining these three technologies while taking advantage of t...
متن کاملInvestigation of the effect of phosphate on the physical and microstructural properties of synthetic calcium aluminate cement
The aim of this study was to investigate the synthesis of calcium aluminate cement with and without phosphate additive by combustion synthesis. After preparing the gel from a solution containing aluminum and calcium nitrates and glycine fuel and ammonium dihydrogen Phosphate, its combustion was performed at 400 ° C. X-ray diffraction pattern and thermal analysis of the combustion sample showed...
متن کاملCalcium doped nickel ferrite powders prepared by sol-gel combustion method
Calcium doped nickel ferrite powders have been prepared by sol-gel combustion technique. Metal nitrates, such as calcium nitrate, nickel nitrate and ferric nitrate, were used as the source materials and citric acid and polyvinyl alcohol were used as the burning agent and agglomeration reducing agent, respectively. The average crystallite size of the prepared ferrite was in the order of ~70- 92 ...
متن کاملCalcium doped nickel ferrite powders prepared by sol-gel combustion method
Calcium doped nickel ferrite powders have been prepared by sol-gel combustion technique. Metal nitrates, such as calcium nitrate, nickel nitrate and ferric nitrate, were used as the source materials and citric acid and polyvinyl alcohol were used as the burning agent and agglomeration reducing agent, respectively. The average crystallite size of the prepared ferrite was in the order of ~70- 92 ...
متن کاملEffect of the Synthesis Parameters on the Properties of Biphasic Ca(OH) -HA Nanopowders for Tissue Engineering Applications
Nanocrystalline hydroxyapatite was precipitated from calcium hydroxide and phosphoric acid. Effects of precipitation temperature and different calcium to phosphate ratios (Ca/P) on the obtained powders were investigated. Characteriza-tion of the powders was performed using XRD and FTIR spectra, scanning electron microscopy, and transmission electron microscopy. Increase in precipitation t...
متن کامل