Building Radio frequency IDentification for the Global Environment Secure Semi-Passive RFID Tags – Prototype and Analysis
نویسنده
چکیده
This report documents the results of task 4.2.2 “Secure Semi-Passive RFID Tags”. After a brief motivation for development of semi-passive tags in WP4 as prototype platform, the report shortly describes the three different platforms. A more detailed report about the development of the tags is available in D4.2.1. The following analysis section presents the results of the tests that were performed with the prototypes. All three prototypes are working according the defined specification and are available to serve as demonstrators of passive RFID tags with extended tag functionality.
منابع مشابه
Secure Symmetric Authentication for RFID Tags
The project ART proposes to enhance passive RFID (Radio Frequency Identification) tags with cryptographically secure authentication. Starting with a short introduction into common RFID systems with passive tags, we present a motivation why secure authentication with standardized symmetric crypto algorithms for RFID tags is necessary for many applications. We demonstrate vulnerabilities of curre...
متن کاملSimulation and Analysis of Rfid Localization Algorithms
Simulation and Analysis of RFID Localization Algorithms. Radio frequency identification (RFID) based localization systems provide a unique approach to localize mobile entities equipped with RFID readers or tagged with RFID tags. UHF RFID systems using passive tags are a good choice considering their cost, reading range, and reliability. With global acceptance and deployment of UHF RFID systems ...
متن کاملDesign and emulation of new robust architectures for UHF RFID Tags
RFID ICs such as EPC gen2 tag are low cost tags which can be used for critical or secure applications. Increasing their robustness is not trivial due to the wide range of error sinks (EM perturbation, attacks...). Moreover increasing the robustness must have a minimum impact on the die area but also must fit with a standardized protocol. In this work we propose a design methodology in order to ...
متن کاملAn Indoor Localization System Design Using RSSI and RFID Signals for Security Purpose by Distance Analysis
A global indoor localization system based on the radio frequency identification (RFID) technology. A reader, installed on the robot, measures the received signal strength indication (RSSI) and the phase shift of UHF-RFID signals coming from a set of passive tags deployed on the ceiling of the environment. The position of the tags in the environment is only roughly known at the beginning. Exploi...
متن کاملPassive RFID based Tracking and Localization for Indoor Navigation An Autonomous Passive RFID-Assisted Mobile Robot System for Indoor Positioning
Indoor positioning systems (IPS) locate objects in closed structured such as warehouses, hospitals, libraries, and office building, where Global Positioning System (GPS) typically does not work due to poor satellite reception. Inherently, indoor positioning is a vital challenge facing the industry for a long time. Most of the available IPS operate based on optical tracking, motor encoding, and ...
متن کامل