Carbon footprint of polycrystalline photovoltaic systems

نویسندگان

  • Nikolaos Stylos
  • Christopher Koroneos
چکیده

The environmental and energy parameters of Photovoltaic (PV) systems play a very important role when compared to conventional power systems. In the present paper, a typical PV-system is analyzed to its elements and an assessment of the material and energy requirements during the production procedures is attempted. A Life Cycle Analysis (LCA) is being performed on the production system of photovoltaics. Energy and environmental analyses are extended to the production of the primary energy carriers. This allows having a complete picture of the life cycle of all the PV-components described in the present study. Four different scenarios are examined in detail providing every possible aspect of scientific interest involving polycrystalline PV systems. In order to obtain concrete results from this study, the specific working tool used is the Eco-Indicator ’95 (1999) as being reliable and widely applied and accepted within LCA community. A process that relates inventory information with relevant concerns about natural resource usage and potential effects of environmental loadings is attempted. Large-scale PVsystems have many advantages in comparison with a conventional power system (e.g. diesel power station) in electricity production. As a matter of fact, PV-systems become part of the environment and the ecosystems from the moment of their installation. Carbon Footprints of various PV-systems scenarios are greatly smaller than that of a diesel power station operation. Further technological improvements in PV module production and in the manufacture of Balance-of-System components, as well as extended use of renewable energy resources as primary energy resources could make Carbon Footprint of PV-systems even smaller. Extended operational period of time (O.P.T.) of PV-systems determined by system reliability should be given special attention, because it can dramatically mitigate energy resources and raw materials exploitation. 2013 Elsevier Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Estimating Efficiency of Monocrystalline and Polycrystalline Photovoltaic Panels Using Neural Network Models

The energy production analysis of a  photovoltaic system depends on the panels tempreture and solar radiation. An endless and free source of solar energy received at the Earth's surface depends on the geographical location, different hours of day and seasons of the year.Hence, its correct evaluation is a strategic factor for the feasibility of a solar system. in this paper, a new method of ener...

متن کامل

Maximum Power Point Analysis Using Simulink/Matlab for a Hybrid Solar Photovoltaic/Battery Storage system

Electricity generation using solar photovoltaic systems pose a unique challenge to improve the efficiency and to minimise the manufacturing cost. Research and development in this area has been expanding as it is environmentally friendly and helps the planet to reduce the greenhouse gas emission while reducing the carbon footprint. As a result, solar photovoltaic (PV) electrical power generation...

متن کامل

Experimental Studies on the Flammability and Fire Hazards of Photovoltaic Modules

Many of the photovoltaic (PV) systems on buildings are of sufficiently high voltages, with potential to cause or promote fires. However, research about photovoltaic fires is insufficient. This paper focuses on the flammability and fire hazards of photovoltaic modules. Bench-scale experiments based on polycrystalline silicon PV modules have been conducted using a cone calorimeter. Several parame...

متن کامل

Electrical and thermal properties of a carbon nanotube/polycrystalline BiFeO3/Pt photovoltaic heterojunction with CdSe quantum dots sensitization.

Electrical and thermal properties of a carbon nanotube (CNT)/multiferroic BiFeO(3) (BFO)/Pt photovoltaic heterojunction are investigated for the first time. Enhanced photovoltaic properties (J(sc)≈ 2.1 μA cm(-2) and V(oc)≈ 0.47 V), as compared to the traditional polycrystalline BFO with indium tin oxide (ITO) as the top electrode, are observed due to the unique properties of CNT. An equivalent ...

متن کامل

Sensitivity analysis of parameters affecting carbon footprint of fossil fuel power plants based on life cycle assessment scenarios

In this study a pseudo comprehensive carbon footprint model for fossil fuel power plants is presented. Parameters which their effects are considered in this study include: plant type, fuel type, fuel transmission type, internal consumption of the plant, degradation, site ambient condition, transmission and distribution losses. Investigating internal consumption, degradation and site ambient con...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016