Sintering and Fracture Behavior of Composites Based on Alumina-zirconia (yttria)-nonoxides

The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite

Alumina-Mullite-Zirconia ceramic composites were prepared by reaction sintering of alumina, zircon mixture and the sintering aids of magnesia and titania at temperatures of 1400 and 1600 C for 2 hours. The development of different phases and microstructures of the composites were analysed to assess the relative influence of the additives on the formation of alumina-zirconia-mullite compos...

Spark Plasma Sintered Hydroxyapatite – Zirconia Composites: Structural and Mechanical Properties

Hydroxyapatite (Ca10(PO4)6(OH)2) (HAp) is a very attractive material for human tissue implantation, beacuse it makes up ~69% of the weight of bone [1]. Unfortunately HAp posses low mechanical properties (strength, fracture toughness), which is a barrier to its applications in load-bearing situations [2]. The mechanical properties of HAp composites, is based on the synthesis of composites and th...

Processing and Properties of Zirconia-Toughened Alumina Prepared by Gelcasting

Zirconia-toughened alumina (ZTA) using yttria-stabilised zirconia is a good option for ceramic-ceramic bearing couples for hip joint replacement. Gelcasting is a colloidal processing technique capable of producing complex products with a range of dimensions and materials by a relatively low-cost production process. Using gelcasting, ZTA samples were prepared, optimising the stages of fabricatio...

Effects of the addition of minute amounts of alumina on the microstructure and sintering behavior of yttria stabilized tetragonal zirconia polycrystals ceramic via a co - precipitation process

Slow-Crack-Growth Behavior of Zirconia-Toughened Alumina Ceramics Processed by Different Methods

A study of slow-crack propagation in zirconia-toughened alumina (ZTA) ceramics is presented. Different ZTA composites, using either unstabilized or yttria-stabilized zirconia, have been tested. The materials were prepared in the range 0–15 vol% ZrO2, using two processing methods: powder mixing and a modified colloidal route. Crack propagation tests have been conducted for crack velocities from ...