The use of tin-decorated mesoporous carbon as an anode material for rechargeable lithium batteries.
نویسندگان
چکیده
A sonochemical process has been developed for the insertion of tin nanoparticles into mesoporous carbon, giving a product which was used as a building block for the anode of a rechargeable Li battery; the electrode could deliver a reversible capacity of 400 mAh gr(-1)(C + Sn) at 100% cycling efficiency, which is higher than that of graphite electrodes.
منابع مشابه
Carbon-coated mesoporous SnO2 nanospheres as anode material for lithium ion batteries
In this paper mesoporous SnO2 nanospheres with an average diameter of about 83 nm, composed of many tiny primary particles ( 10 nm) and holes, are synthesized on a large scale by a simple hydrothermal route. The as-prepared mesoporous SnO2 nanospheres were uniformly coated with carbon by a further hydrothermal treatment in glucose aqueous solution. As anode materials for lithium-ion batteries, ...
متن کاملSnO2 Nanowires on Carbon Nanotube Film as a High Performance Anode Material for Flexible Li-ion Batteries
Today, Li-ion batteries (LIBs) are the most common rechargeable batteries used in electronic devices. SnO2 with theoretical specific capacity of 782 mAh/g is among the best anode materials for LIBs. In this report, Three-dimensional SnO2 nanowires (NWs) on carbon nanotube (CNT) thin film (SnO2 / CNT) is fabricated using a combination of vacuum filtration and thermal evaporation techniques. The ...
متن کاملAn Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes
Lithium ion batteries are among the most used rechargeable batteries in the world. Carbon nanostructures including carbon nanotubes (CNTs) are considered as important electrode materials for this kind of batteries. Therefore improving the performance of these carbon based electrodes in Lithium ion batteries is an important issue and attracts much attention in the battery community. In this manu...
متن کاملUltrafine tin nanocrystallites encapsulated in mesoporous carbon nanowires: scalable synthesis and excellent electrochemical properties for rechargeable lithium ion batteries.
A morphology-conserved transformation yields Sn@C nanowires (UTP@CW, ∼21 wt% carbon and ∼77 wt% tin) with a high encapsulation density of ultrafine tin nanoparticles in porous carbon nanowires, which exhibit excellent reversible capacities and cycling performance for lithium ion batteries, especially at high current rates.
متن کاملLong-lived Aqueous Rechargeable Lithium Batteries Using Mesoporous LiTi2(PO4)3@C Anode
The instability of anode materials during cycling has been greatly limiting the lifetime of aqueous rechargeable lithium batteries (ARLBs). Here, to tackle this issue, mesoporous LiTi2(PO4)3@C composites with a pore size of 4 nm and a large BET surface area of 165 m(2) g(-1) have been synthesized by a novel two-step approach. The ARLB with this type of LiTi2(PO4)3@C anode, commercial LiMn2O4 ca...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Chemical communications
دوره 7 شماره
صفحات -
تاریخ انتشار 2005