Step and Search Control Method to Track the Maximum Power in Wind Energy Conversion Systems A Study

نویسندگان

  • V. Karthikeyan
  • V. J. Vijayalakshmi
  • P. Jeyakumar
چکیده

A simple step and search control strategy for extracting maximum output power from grid connected Variable Speed Wind Energy Conversion System (VSWECS) is implemented in this work. This system consists of a variable speed wind turbine coupled to a Permanent Magnet Synchronous Generator (PMSG) through a gear box, a DC-DC boost converter and a hysteresis current controlled Voltage Source Converter (VSC). The Maximum Power Point Tracking (MPPT) extracts maximum power from the wind turbine from cut-into rated wind velocity by sensing only by DC link power. This system can be connected to a micro-grid. Also it can be used for supplying an isolated local load by means of converting the output of Permanent Magnet Synchronous Generator (PMSG) to DC and then convert to AC by means of hysteresis current controlled Voltage Source Converter (VSI).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Maximum Power Point Tracking of Wind Energy Conversion System using Fuzzy- Cuckoo Optimization Algorithm Strategy

Nowadays the position of the renewable energy is so important because of the environment pollution and the limitation of fossil fuels in the world. Energy can be generated more and more by the renewable sources, but the fossil fuels are non-renewable. One of the most important renewable sources is the wind energy. The wind energy is an appropriate alternative source of fossil fuel. The replacem...

متن کامل

Intelligent Control for the Variable-Speed Variable-Pitch Wind Energy System

In this paper, a new type of multi-variable compensation control method for the wind energy conversion systems (WECS) is presented. Based on wind energy conversion systems, combining artificial neural network (ANN) control and PID, a new type of PID NN intelligent controller for steady state torque of the wind generator is designed, by which the steady state torque output is regulated to track ...

متن کامل

Development and Analysis of a Novel Multi-Mode MPPT Technique with Fast and Efficient Performance for PMSG-Based Wind Energy Conversion Systems

Wind energy is one of the most promising renewable energy resources. Due to instantaneous variations of the wind speed, an appropriate Maximum Power Point Tracking (MPPT) method is necessary for maximizing the captured energy from the wind at different speeds. The most commonly used MPPT algorithms are Tip Speed Ratio (TSR), Power Signal Feedback (PSF), Optimal Torque Control (OTC) and Hill Cli...

متن کامل

Improvement of perturb and observe method for maximum power point tracking in wind energy conversion system using fuzzy controller

One of the main problems in wind energy conversion system (WECS) is how to achieve maxim­u­m output power in different wind speeds. Maximum methods for maximum power point tracking in wind energy conversion syst­e­ms require the knowledge of system characteristics and mechanic sensors. So, using these methods practically will follow with high price and an abundant difficulties. In this pape...

متن کامل

Improvement of perturb and observe method for maximum power point tracking in wind energy conversion system using fuzzy controller

One of the main problems in wind energy conversion system (WECS) is how to achieve maxim‌u‌m output power in different wind speeds. Maximum methods for maximum power point tracking in wind energy conversion syst‌e‌ms require the knowledge of system characteristics and mechanic sensors. So, using these methods practically will follow with high price and an abundant difficulties. In this pape...

متن کامل

Optimal Torque Control of PMSG-based Stand-Alone Wind Turbine with Energy Storage System

In this paper optimal torque control (OTC) of stand-alone variable-speed small-scale wind turbine equipped with a permanent magnet synchronous generator and a switch- mode rectifier is presented. It is shown that with OTC method in standalone configuration, power coefficient could be reached to its maximum possible value, i.e. 0.48. An appropriate control algorithm based on turbine characterist...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • CoRR

دوره abs/1403.5865  شماره 

صفحات  -

تاریخ انتشار 2014