Glass Processing Using Microsecond, Nanosecond and Femtosecond Pulsed Lasers
نویسندگان
چکیده
Laser processing of glass components is of significant commercial interest for the optoelectronics and telecommunications industries. In this paper, we present laser processing techniques using microsecond, nanosecond, and femtosecond lasers for machining of glass. Surface structures, mainly groove geometries, are generated with a diode-pumped solid-state nanosecond pulsed UV laser operating at 266 nm, a Q-switched CO2 laser operating at 9.25 μm, a CO2 laser operating at 10.6 μm and the femtosecond pulsed laser operating at 800 nm. Grooves are cross-sectioned and viewed with a focused ion beam (FIB) microscope. The resultant material structures are examined with respect to the differences in time scale and the appropriateness of each laser type for particular processes.
منابع مشابه
Texturing of titanium (Ti6Al4V) medical implant surfaces with MHz-repetition-rate femtosecond and picosecond Yb-doped fiber lasers.
We propose and demonstrate the use of short pulsed fiber lasers in surface texturing using MHz-repetition-rate, microjoule- and sub-microjoule-energy pulses. Texturing of titanium-based (Ti6Al4V) dental implant surfaces is achieved using femtosecond, picosecond and (for comparison) nanosecond pulses with the aim of controlling attachment of human cells onto the surface. Femtosecond and picoseco...
متن کاملOptical breakdown of air triggered by femtosecond laser filaments
Experiments on gas breakdown by powerful optical pulses date back to the early days of lasers. The following development resulted in the generation of dense plasma columns up to several tens of meters in length. Pulsed neodymium-glass and CO2 lasers used in these demonstrations had pulse energies of several hundred Joules. Optical breakdown with high-energy nanosecond (or longer) laser pulses i...
متن کاملApplication of nanosecond-pulsed dielectric barrier discharge for biomedical treatment of topographically non-uniform surfaces
Antimicrobial effectiveness of a nanosecond-pulsed dielectric barrier discharge (DBD) was investigated and compared with that of a microsecond-pulsed DBD. Experiments were conducted on the Escherichia coli bacteria covering a topographically non-uniform agar surface acting as one of the DBD electrodes. They reveal that the nanosecond-pulsed DBD can inactivate bacteria in recessed areas whereas ...
متن کاملInvestigating Pcb Processing Using Q-switched Dpss Nanosecond Green Laser
Diode pumped solid state (DPSS) Q-switched nanosecond pulsed lasers are becoming the laser of choice for a wide variety of processes in printed circuit board (PCB) manufacturing. Lasers are being used today in PCB manufacturing for via drilling, depaneling, profiling (cutting), laser direct imaging (LDI), repair, trimming, marking, skiving and other processes. The majority of these processes ar...
متن کاملPeer-Reviewed Literature:
The use of a laser in place of a mechanical keratome for flap creation was a turning point in the field of refractive surgery. Visible and near infrared laser light are absorbed by the refractive structures of the eye and allowed to pass freely into the eye without effect at low-power densities. At high-power densities, the nonlinear optical properties of the cornea lead to absorption, generati...
متن کامل