Public Data for this TechPort entry High energy density additives for Hybrid Fuel Rockets to Improve Performance and Enhance Safety
ثبت نشده
چکیده
We propose a conceptual study of prototype strained hydrocarbon molecules as high energy density additives for hybrid rocket fuels to boost the performance of these rockets without compromising safety and reliability. Use of these additives could extend the range of applications for which hybrid rockets become an attractive alternative to conventional solid or liquid fuel rockets. The objectives of the study were to confirm and quantify the high enthalpy of these strained molecules and to assess improvement in rocket performance that would be expected if these additives were blended with conventional fuels. We confirmed the chemical properties (including enthalpy) of these additives. However, the predicted improvement in rocket performance was too small to make this a useful strategy for boosting hybrid rocket performance. Detailed Description Hybrid rockets use a solid fuel with a liquid or gaseous oxidizer. They have advantages over solid fuel rockets for certain space applications because the solid fuel component is more stable than a combined solid fuel and oxidizer, and have advantages over liquid fuel rockets because the fuel does not require cryogenic storage or pumping and the burn rate can be controlled by regulating the flow of oxidizer. Ideal fuels should exhibit a fast regression rate, high density and good mechanical stability (so it will not break apart during burning). A current project at ARC is to evaluate hybrid rockets comprised of solid paraffin fuel and cryogenic nitrous oxide and LOX oxidizer and has shown that higher regression rates are needed. Strained cyclic hydrocarbons have positive enthalpy and can be blended with paraffins to make fuels for hybrid rockets, but to be effective the resulting solid must have physical and mechanical characteristics at least comparable to the pure paraffin fuels. The stable hydrocarbon molecules with the highest strain energy are comprised of triangular rings of carbon atoms (cyclopropane), but these are gases at normal temperatures and pressures. Recently, chemists have synthesized molecules (called ivyanes, shown in Figure 1) containing multiple cyclopropane rings bonded together. We propose investigating blends of ivyanes and paraffins to determine their https://ntrs.nasa.gov/search.jsp?R=20140011258 2017-12-21T21:35:51+00:00Z
منابع مشابه
Energy and economic comparison of SOFC-GT, MCFC-GT, and SOFC-MCFC-GT hybrid systems
Conversion of fossil fuels to electrical power is the most popular method of electrical power generation. Due to the depletion of fossil fuels and the increase in air pollution, the necessity of using high efficiency power generation systems is increasing. High temperature fuel cells, such as solid oxide fuel cells (SOFC) and molten carbonate fuel cells (MCFC), have high efficiency. According t...
متن کاملModeling and Fuzzy Control Strategy Design for the Hydraulic Hybrid Refuse Truck
In the present paper, the idea of braking energy regeneration and reusing that energy during acceleration for a refuse truck is comprehended. According to their driving cycle, the refuse trucks have a good potential for braking energy regeneration. On the other hand, hydraulic hybrid is a powertrain with high power density which is appropriate for energy regeneration. In the primary stage of th...
متن کاملHybrid Rocket Technology: An Overview
Introduction In hybrid rocket motors, one of the two propellants (oxidizer or fuel) is in liquid phase and the other is in solid phase. The combination of a solid fuel and a liquid oxidizer is the most common one, Fig. 1. 1 Even though the idea of hybrid rocket motor was conceived as early as 1937, it was only after 1960s they were built successfully with good combustion efficiency. A discussio...
متن کاملComparison of Single-stage and Two-stage Tubular SOFC-GT Hybrid Cycles: Energy and Exergy Viewpoints
In this work, single-stage and two-stage tubular solid oxide fuel cell (SOFC)/gas turbine hybrid cycles are comparatively examined from the energy and exergy viewpoints. For this purpose, mass, energy and exergy balances are applied to all components of the cycles. The behavior of tubular solid oxide fuel cell modeled in this study is validated with the experimental test data of tubular SOFC de...
متن کاملOptimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids
In this paper, Plug-in Fuel Cell Electric Vehicle (PFCEV) is considered with dual power sources including Fuel Cell (FC) and battery Energy Storage. In order to respond to a transient power demand, usually supercapacitor energy storage device is combined with fuel cell to create a hybrid system with high energy density of fuel cell and the high power density of battery. In order to simulate the...
متن کامل