Full modeling of field-assisted ion exchange for graded index buried channel optical waveguides.
نویسندگان
چکیده
The numerical modeling of field-assisted ion exchange in glass through a finite aperture is carried out. The effects of unequal ion mobilities and thermal diffusion are included we believe for the first time in the 2-D case. This allows for the modeling of optical channel waveguides with graded index profiles. It is demonstrated that annealing of backdiffused channel guides is far superior to backdiffusion alone in improving their circular symmetry for better coupling to optical fibers.
منابع مشابه
Systematic modeling study of channel waveguide fabrication by thermal silver ion exchange.
A systematic study of thermal silver ion exchange used for the fabrication of optical channel waveguides is reported in a single-alkali glass. The diffusion equilibrium and diffusion dynamics are experimentally studied, and the concentration-dependent diffusion coefficients are determined. The relationship between the fabrication conditions, i.e., time, temperature, and melt concentration, and ...
متن کاملHigh-density channel alignment of graded index core polymer optical waveguide and its crosstalk analysis with ray tracing method.
We fabricate graded index (GI) multi-channel polymer optical waveguides comprised of poly methyl methacrylate (PMMA)-poly benzyl methacrylate copolymer for the purpose of achieving high thermal stability in the GI profiles. The waveguides obtained show slightly higher propagation loss (0.033 dB/cm at 850 nm) than doped PMMA based GI-core polymer waveguides we have reported, due to the excess sc...
متن کاملCharacterization of Erbium Doped Glass Optical Waveguides by a Fine Tunable Semiconductor Laser
In this paper we describe some methods for characterization of the new active optical channel waveguides (suitable for waveguide lasers and amplifiers at 1550 nm) by means of a fine-tunable semiconductor laser. The channel waveguides were fabricated by ion-exchange technique K⇔ Na and Ag⇔ Na in the newly designed Er-doped silicate glass substrate. The effect of the used technology on the basic ...
متن کاملSapphire and Ti:sapphire Buried Waveguide Structures
Due to its excellent thermal, mechanical, and optical properties, sapphire is one of the most suitable material for integrated optical devices. Although this hard crystalline material is particularly difficult to process, fabrication of Ti-doped sapphire surface channel waveguides by surface structuring [1,2] of planar waveguides or ion in-diffusion [3] has been demonstrated. Generally, device ...
متن کاملSurface acoustic waves for acousto-optic modulation in buried silicon nitride waveguides
We theoretically investigate the use of Rayleigh surface acoustic waves (SAWs) for refractive index modulation in optical waveguides consisting of amophous dielectrics. Considering low-loss Si3N4 waveguides with a standard core cross section of 4.4×0.03 μm size, buried 8-μm deep in a SiO2 cladding we compare surface acoustic wave generation in various different geometries via a piezo-active, le...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 29 18 شماره
صفحات -
تاریخ انتشار 1990