Constraints on Displacement a Phase-based Approach
نویسنده
چکیده
ing away from much of the technical machinery employed by Bresnan here and in what follows, let me clarify the key notions involved here. A transformation T is an ordered pair , where C is a structural condition consisting of a number of terms, and M is a transformational mapping affecting these terms. The wh-movement transformation, e.g., can be encoded as the pair in (54) (I tacitly adapt parts of Bresnan’s original formulation to more current terminology). (54) Wh-movement transformation: [CP Q – W1 – [XP wh – W2 ] – W3 ] 1 2 3 4 } {{ } 5 ⇒
منابع مشابه
VOLUME MINIMIZATION WITH DISPLACEMENT CONSTRAINTS IN TOPOLOGY OPTIMIZATION OF CONTINUUM STRUCTURES
In this paper, a displacement-constrained volume-minimizing topology optimization model is present for two-dimensional continuum problems. The new model is a generalization of the displacement-constrained volume-minimizing model developed by Yi and Sui [1] in which the displacement is constrained in the loading point. In the original model the displacement constraint was formulated as an equali...
متن کاملOptimal Self-healing of Smart Distribution Grids Based on Spanning Trees to Improve System Reliability
In this paper, a self-healing approach for smart distribution network is presented based on Graph theory and cut sets. In the proposed Graph theory based approach, the upstream grid and all the existing microgrids are modeled as a common node after fault occurrence. Thereafter, the maneuvering lines which are in the cut sets are selected as the recovery path for alternatives networks by making ...
متن کاملReinforced Soil Wall Analysis under Working Stress Conditions Using a Two Phase Model with the Introduction of a New Design Parameter
A previously introduced two phase model was used to assess its capability in predicting the behavior of reinforced soil walls under working stress conditions. The two phase model is a homogenization method based on the virtual work theorem. The reinforced soil medium is considered as the superposition of two continuous phases, the reinforcement and matrix phases that interact within the medium....
متن کاملComputer Aided Design for Single-Phase Induction Motors Based on a New Gemoetrical Approach
Design of electrical motors normally involves two main stages: i) Preparation of the main dimensions and parameters. ii) Prediction of the performance. At the first stage the main dimensions of the motor, core stack Lfe and stator outer diameter Do, must be chosen. A set of performance conditions such as breakdown torque, desired output and other important parameters must satisfy the internatio...
متن کاملبررسی تحلیل دینامیکی و تصحیح قیود تماس نقطه به وجه با استفاده از روش لاگرانژ
In this paper, first the validity of 3-D DDA is examined by comparing its solution for dynamic block displacement with analytical solution. Displacement of a single block on an inclined plane subjected to a dynamic loading is studied for analytical solution with respect to the frictional resistance offered by the inclined slope. 3-D DDA predicts accurately the analytical displacements. The modi...
متن کاملAn Approach for Extracting the Main Characteristics of a Smart City
Nowadays, “Smart City” is a very growing and promoting concept. Unlike other concepts related to cities, like digital or green city, it encompasses all technological, human and institutional factors. However, there are too many different viewpoints and definitions of this concept in the literature. The problem statement of this research is that despite the existence of many points of view and d...
متن کامل