On the large deviations of a class of modulated additive processes

نویسندگان

  • Ken R. Duffy
  • Claudio Macci
  • Giovanni Luca Torrisi
چکیده

We prove that the large deviation principle holds for a class of processes inspired by semi-Markov additive processes. For the processes we consider, the sojourn times in the phase process need not be independent and identically distributed. Moreover the state selection process need not be independent of the sojourn times. We assume that the phase process takes values in a finite set and that the order in which elements in the set, called states, are visited is selected stochastically. The sojourn times determine how long the phase process spends in a state once it has been selected. The main tool is a representation formula for the sample paths of the empirical laws of the phase process. Then, based on assumed joint large deviation behavior of the state selection and sojourn processes, we prove that the empirical laws of the phase process satisfy a sample path large deviation principle. From this large deviation principle, the large deviations behavior of a class of modulated additive processes is deduced. As an illustration of the utility of the general results, we provide an alternate proof of results for modulated Lévy processes. As a practical application of the results, we calculate the large deviation rate function for a processes that arises as the International Telecommunications Union’s standardized stochastic model of two-way conversational speech.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Phase-I monitoring of standard deviations in multistage linear profiles

In most modern manufacturing systems, products are often the output of some multistage processes. In these processes, the stages are dependent on each other, where the output quality of each stage depends also on the output quality of the previous stages. This property is called the cascade property. Although there are many studies in multistage process monitoring, there are fewer works on prof...

متن کامل

Performance evaluation of gated volumetric modulated arc therapy

Background: Aim of this study is to evaluate the accuracy of the gated volumetric modulated arc therapy (VMAT/RapidArc) using 2D planar dosimetry, DynaLog files and COMPASS 3D dosimetry system. Materials and Methods: Pre-treatment quality assurance of 10 gated VMAT plans was verified using 2D array and COMPASS 3D dosimetry system. Advantage of COMPASS over 2D planar is that it provides the clin...

متن کامل

The Effect of Medicinal Plants as a Feed Additive in Ruminant Nutrition

Since the use of antibiotics in animal feeds has been banned, researches on alternative natural products that modulate ruminal fermentation have been intensified. Natural compounds such as plant extracts have been considered to be replaced antibiotics as safe and sustainable alternatives. Plant extracts especially essential oils and saponins have strong antimicrobial, antiparasitic, antiprotozo...

متن کامل

Soil Erosion Model Implication (Case Stady: Minab Basin)

Soil erosion is an inevitable phenomenon that additive erosion caused Soil degradation. Additive Soil erosion is one of the major obstacles to achieve the development of agriculture and natural resources. Thus, knowledge of the status and trends of soil erosion and sediment production in the watersheds is one of the most important tools for planning and decision-making. Models are the most popu...

متن کامل

THE EFFECT OF COBALT ADDITIVE ON MICROSTRUCTURE AND PROPERTIES OF W-CU COMPOSITES PREPARED BY SINTERING AND INFILTRATION PROCESSES

In the present paper, the influence of cobalt additive on the sintering/infiltration behavior of W-Cu composite was studied. For this purpose, the mixed powders of tungsten and cobalt were compacted by CIP method and then sintered at 1450, 1550 and 1600 °C in a hydrogen atmosphere. The sintered specimens at 1550 °C were subsequently infiltrated with liquid copper at 1250 °C for 10, 60 and 1...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009