A model of the entropy flux and Reynolds stress in turbulent convection
نویسندگان
چکیده
We propose a closure model for the transport of entropy and momentum in astrophysical turbulence, intended for application to rotating stellar convective regions. Our closure model is first presented in the Boussinesq formalism, and compared with laboratory and numerical experimental results on Rayleigh-Bénard convection and Homogeneous Rayleigh-Bénard convection. The predicted angular momentum transport properties of the turbulence in the slowly rotating case recover the well-known Λ−effect, with an amplitude uniquely related to the convective heat flux. The model is then extended to the anelastic case as well as the fully compressible case. In the special case of spherical symmetry, the predicted radial heat flux is equivalent to that of mixing-length theory. For rotating stars, our model describes the coupled transport of heat and angular momentum, and provides a unified formalism in which to study both differential rotation and thermal inhomogeneities in stellar convection zones.
منابع مشابه
Effects of Rib Shapes on Heat Transfer Characteristics of Turbulent Flow of Al2O3-Water Nanofluid inside Ribbed Tubes
In this paper, convection heat transfer of Al2O3-water nanofluid turbulent flow through internally ribbed tubes with different rib shapes (rectangular, trapezoidal and semi-circular) is numerically investigated. For each rib shape, the optimum geometric ratio and volume fraction were calculated using entropy generation minimization technique. The governing equations in...
متن کاملEffects of the rectangular groove dimensions on the thermal features of the turbulent Al2O3-water nanofluid flow in the grooved tubes
The forced convection heat transfer of turbulent Al2O3-water nanofluid flow inside the grooved tubeswith the different aspect ratio of the rectangular grooves is numerically investigated. The governingequations have been solved using finite volume method (FVM) coupled with SIMPLE algorithm. It isassumed the heat flux is constant on the grooved walls. The Single-phase approach is applied for th...
متن کاملTurbulent Mixed Convection of a Nanofluid in a Horizontal Circular Tube with Non-Uniform Wall Heat Flux Using a Two-Phase Approach
In this paper, Turbulent mixed convective heat transfer of water and Al2O3 nanofluid has been numerically studied in a horizontal tube under non-uniform heat flux on the upper wall and insulation in the lower wall using mixture model. For the discretization of governing equations, the second-order upstream difference scheme and finite volume method were used. The coupling of pressure and veloci...
متن کاملNumerical Investigation of Nanofluid Mixed Convection and Entropy Generation in an Inclined Ventilating Cavity
This paper presents results of a numerical study of mixed convection and entropy generation of Cu–water nanofluid in a square ventilating cavity at different inclination angles. Except a piece of bottom wall with a uniform heat flux, all of the cavity walls are insulated. The inlet port is placed at the bottom of the left wall and the outlet port is positioned at the top of the right wall....
متن کاملNumerical Predictions of Turbulent Mixed Convection Heat Transfer to Supercritical Fluids Using Various Low Reynolds Number k-e Turbulence Models
There are a number of systems in which supercritical cryogenic fluids are used as coolants or propellant fluids. In some modern military aircraft, the fuel is pressurized above its critical point and used as a coolant to remove heat from the aircraft engine. Accurate prediction of heat transfer coefficients to turbulent flows of supercritical fluids is essential in design of such systems. One o...
متن کامل