A Design of AES Encryption Circuit with 128-bit Keys Using Look-Up Table Ring on FPGA

This paper addresses a pipelined partial rolling (PPR) architecture for the AES encryption. The key technique is the PPR architecture. With the proposed architecture on the Altera Stratix FPGA, two PPR implementations achieve 6.45Gbps throughput and 12.78Gbps throughput, respectively. Compared with the unrolling implementation that achieves a throughput of 22.75Gbps on the same FPGA, the two PPR implementations improve the memory efficiency (i.e., throughput divided by the size of memory for core) by 13.4% and 12.3%, respectively, and reduce the amount of the memory by 75% and 50%, respectively. Also, the PPR implementation has a up to 9.83% higher memory efficiency than the fastest previous FPGA implementation known to date. In terms of resource efficiency (i.e., throughput divided by the equivalent logic element or slice), one PPR implementation offers almost the same as the rolling implementation, and the other PPR implementation offers a medium value between the rolling implementation and the unrolling implementation that has the highest resource efficiency. However, the two PPR implementations can be implemented on the minimum-sized Stratix FPGA while the unrolling implementation cannot. The PPR architecture fills the gap between unrolling and rolling architectures and is suitable for small and medium-sized FPGAs. key words: AES encryption, pipelined partial rolling (PPR), FPGA