Inferred pH in Steam Plant Water Chemistry
ثبت نشده
چکیده
Inferred pH means pH calculated from straight and cation conductivity. The calculation can be applied to condensate, feedwater, and boiler water. Although not widely used in the United States, inferred pH is popular in Europe. Some plant chemists find inferred pH useful because it eliminates the need to measure pH directly, which without proper equipment can be a difficult task. This paper discusses the two models used to calculate inferred pH and the errors resulting if the actual conditions do not match the model.
منابع مشابه
Effect of powder sizes, pH of water, ultrasound and method of distillation on extraction of fennel essential oil
The essential oils are frequently used in food processing industry, perfumery, cosmetics and pharmaceuticals. Most of the oils obtained by steam distillation and water distillation. It is necessary to specify the best conditions of essential oils production to get much more major compound(s) and higher yield oil. So, fennel oil was selected in this study. The objective of this work was to ident...
متن کاملA Capillary Pressure Model for Geothermal Reservoirs
Abstract Steam-water capillary pressure is often either ignored or determined artificially in geothermal reservoir engineering. However steam-water capillary pressure plays an important role in geothermal reservoir performance and may not be substituted by air-water capillary pressure. To this end, preliminary mathematical models have been developed to calculate drainage and imbibition steam-wa...
متن کاملThe optimum pressure for working fluid in feed water heaters of steam power plants
The aim of this study is to find the optimal water pressure and percentage of supply vapour in the feed water heaters (fwhs) of steam power plants, such that they maximize the thermal efficiency of the Rankine cycle within pre-specified values of minimum and maximum pressures of the thermodynamic cycle. Thermal efficiency is defined as a function of unknown variables (fluid pressure and vap...
متن کاملThe optimum pressure for working fluid in feed water heaters of steam power plants
The aim of this study is to find the optimal water pressure and percentage of supply vapour in the feed water heaters (fwhs) of steam power plants, such that they maximize the thermal efficiency of the Rankine cycle within pre-specified values of minimum and maximum pressures of the thermodynamic cycle. Thermal efficiency is defined as a function of unknown variables (fluid pressure and vap...
متن کاملOptimization of processing parameters for extraction of essential oil from Foeniculum vulgare
Background and objectives: It is necessary to specify the best conditions of essential oils production to get more major compound(s) and higher yield oil. The fennel oil is useful in pharmaceutical industry as flavor. The main component of fennel oil is anethole (55-75%). The objective of this work was to identify the effect of particle size, pH of water, method of distillatio...
متن کامل