A 0.18μm and 2GHz CMOS Differential Low Noise Amplifier
نویسنده
چکیده
We have proposed a 2 GHz CMOS Differential Low Noise Amplifier (LNA) for wireless receiver system. The LNA is fabricated with the 0.18 μm standard CMOS process. Cadence design tool Spectre_RF is used to design and simulation based on resistors, inductors, capacitors and transistors. Power constrained methodology is used for the design of Differential Low Noise Amplifier. Consuming 9mA current at 1.8V supply voltage, the proposed LNA exhibits a power gain of 15.87 dB, noise Figure (NF) of 2.4 dB, S11 of -9.842 dB and S12 of -42.86dB. The input IP3 (IIP3) at 2 GHz is -2.86127 dBm, and consumes 16.2 mW of power. KeywordsLow Noise Amplifier (LNA), CMOS, noise figure (NF), power, IIP3.
منابع مشابه
A 1.8V and 2GHz Inductively Degenerated CMOS Low Noise Amplifier
This paper presents the design and simulation of Low Noise Amplifier (LNA) in a 0.18μm CMOS technology. The LNA function is to amplify extremely low noise amplifier without adding noise and preserving required signal to noise ratio. Cadence design tool Spectre_RF is used to design and simulation based on resistors, inductors, capacitors and transistors. Power constrained methodology is used for...
متن کاملA High Gain and Forward Body Biastwo-stage Ultra-wideband Low Noise Amplifier with Inductive Feedback in 180 nm CMOS Process
This paper presents a two-stage low-noise ultra-wideband amplifier to obtain high and smooth gain in 180nm CMOS Technology. The proposed structure has two common source stages with inductive feedback. First stage is designed about 3GHz frequency and second stage is designed about 8GHz. In simulation, symmetric inductors of TSMC 0.18um CMOS technology in ADS software is used.Simulations results ...
متن کاملArea Efficient Wide Frequency Range CMOS Voltage Controlled Oscillator For PLL In 0.18μm CMOS Process
Current starved VCO is simple ring oscillator consisting of cascaded inverters. Differential ring oscillator has a differential output to reject common-mode noise, power supply noise and so on. In this paper we have designed and simulated Current Starved VCO and Differential VCO for PLL in Tanner 13.0v 0.18μm digital CMOS process. Performance comparison is done in terms of high oscillation freq...
متن کاملA W-band Simultaneously Matched Power and Noise Low Noise Amplifier Using CMOS 0.13µm
A complete procedure for the design of W-band low noise amplifier in MMIC technology is presented. The design is based on a simultaneously power and noise matched technique. For implementing the method, scalable bilateral transistor model parameters should be first extracted. The model is also used for transmission line utilized in the amplifier circuit. In the presented method, input/output ma...
متن کاملA Novel High Frequency, High-Efficiency, Differential Class-E Power Amplifier in 0.18μm CMOS
This paper presents the design of a high efficiency, low THD, 5.7GHz fully differential power amplifier for wireless communications in a standard 0.18μm CMOS technology. The power amplifier employs a fully differential class-E topology to achieve high power efficiency by exploiting its soft-switching property. In order to achieve high operating frequency, an injectionlocked oscillator is utiliz...
متن کامل