Sintering Behavior of Vitrified Ceramic Tiles Incorporated with Petroleum Waste
نویسنده
چکیده
منابع مشابه
Ceramic products obtained from rock wastes
Residue powders resulting from cutting and machining operations in slate quarries were processed by a press and sintering route to manufacture ceramic products such as flooring and roofing tiles. The first part of this work consisted of a laboratory study carried out by uniaxially pressing the powders to shape and sintering in air using a muffle type furnace. A plan of sintering experiments was...
متن کاملProduction of glass-ceramic from incinerator fly ash
Vitrification is one of the technological options for treating toxic waste. This paper reports the results of the feasibility study of utilizing fly ash from municipal waste incinerators by powder sintering technology. This process was used to transform vitrified incinerated fly ash into a CaO–Al2O3–SiO2 system of glass ceramic products. The major phase exhibited is gehlenite (Ca2Al2SiO7), whic...
متن کاملEvaluation of Heterogeneous Densification, Anisotropic Shrinkage and Rheological Behavior of Ceramic Materials during Liquid Phase Sintering by Numerical-Experimental Procedure
The effective shear and bulk viscosity, as well as dynamic viscosity, describe the rheological properties of the ceramic body during the liquid phase sintering process. The rheological parameters depend on the physical and thermo-mechanical characteristics of the material such as relative density, temperature, grain size, diffusion coefficient, and activation energy. Thermal behavior of the cer...
متن کاملWaste derived glass ceramic composites prepared by low temperature sintering/sinter-crystallisation
Waste derived glass ceramic composites prepared by low temperature sintering/sinter-crystallisation I. Ponsot, R. Detsch, A. R. Boccaccini & E. Bernardo To cite this article: I. Ponsot, R. Detsch, A. R. Boccaccini & E. Bernardo (2015) Waste derived glass ceramic composites prepared by low temperature sintering/sinter-crystallisation, Advances in Applied Ceramics, 114:sup1, S17-S25, DOI: 10.1179...
متن کاملCompressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents
In present research, the foam glass-ceramic composites fabricated by window glass, steel slag and SiC, CaCO3 foaming agents were investigated by press–sintering method. The optimum sintering temperature was obtained at 1200°C with a 3-minutes holding time and 20°C/min heating rate. The optimum pressure level of 80 MPa for achieving the 70 % of relative density was selected. The effec...
متن کامل