The “Real” Cost of ESD Damage
نویسنده
چکیده
منابع مشابه
Assessment of ESD threats to electronic components and ESD control requirements
We propose new methods for the assessment of real electrostatic discharge (ESD) threats to electronic components in modern electronics manufacturing environment, where the devices are more sensitive to ESD than ever. The work was based on two fundamental questions: what are the key parameters of ESD that must be controlled in order to minimise risk of damage, and what are the threshold levels o...
متن کاملWhole-Chip ESD Protection Strategy for CMOS Integrated Circuits in Nanotechnology
Abstract On-chip electrostatic discharge (ESD) protection circuits had been built in IC chips to protect the devices and circuits against ESD damage. But, ESD protection circuits constructed with the scaled-down CMOS devices are very weak to ESD stress. Therefore, novel ESD protection solutions must be developed to overcome this reliability challenge for integrated circuits fabricated in the na...
متن کاملDamage of light-emitting diodes induced by high reverse-bias stress
The ability of a nitride light-emitting diode (LED) to withstand electrostatic discharge (ESD) is important because of the insulating property of the sapphire substrate. Therefore, damage caused by ESD to a nitride LED is a valuable subject. However, damage is caused by ESD in a very short period, so monitoring its evolution is very difficult. Accordingly, ESD experiments are performed and the ...
متن کاملCost-effectiveness of stroke unit care followed by early supported discharge.
BACKGROUND AND PURPOSE Stroke places a significant burden on the economy in England and Wales with the overall societal costs estimated at pound7 billion per annum. There is evidence that both stroke units (SUs) and early supported discharge (ESD) are effective in treating patients with stroke. This study assesses the cost-effectiveness of the combination of these 2 strategies and compares it w...
متن کاملInvestigation of ESD Prevention for Deshunted GMR Heads
The electrostatic discharge (ESD) effect in GMR heads in the deshunting process is studied in order to prevent the damage in this process. The simulation and experiment results are investigated and compared. It is found from these results that sequences of deshunting process, currently operating, can cause the damage of GMR heads due to the ESD effect, based on the charged device model, CDM. Th...
متن کامل