Stress concentration in a circular hole in composite plate
نویسندگان
چکیده
A non-contact measurement method, namely electronic speckle pattern interferometer (ESPI), was used to investigate the tensile strain field of a composites plate in the presence of stress concentrations caused by a geometrical defect consisting of circular hole. ESPI uses the principle of 3D speckle interferometry to measure the deformation and contour of the measuring field with submicrometer accuracy. The ESPI technique clearly revealed the strain concentrations near the singularity. The experimental results are compared with the predictions of a theoretical model previously developed by Lekhnitskii’s and a finite element study. 2004 Elsevier Ltd. All rights reserved.
منابع مشابه
Measurement of Variation in Fracture Strength and Calculation of Stress Concentration Factor in Composite Laminates with Circular Hole
In this research, residual strength and stress concentration factor of laminated composites with a circular open hole are studied analytically, numerically and experimentally. The numerical study was carried out using the finite element method. Moreover an analytical study was carried out with developing of point stress criterion. Mechanical testing was performed to determine the un-notched ten...
متن کاملStress Concentration Factor in a Functionally Graded Material Plate around a Hole
Stress concentration factors have been examined in a functionally graded material (FGM) plate with central holes in different shapes in this essay. The material properties change along the thickness of plate. ABAQUS software has been utilized for modeling of problem in which subroutine of ABAQUS sub-program was used for modeling of the targeted material. The considering shapes for hole in plate...
متن کاملFinite Plate with Circular and Square Hole under Partial Loading
In this paper a general analytical solution is obtained to find stress distribution in a finite elastic plate with a circular or square hole subjected to arbitrary biaxial partial loading using modified boundary condition by assuming plane stress conditions. The method employed is based on solution of circular hole in finite rectangular plate. This plate is mapped to circular ones and the parti...
متن کاملStress Concentration Factor in a Functionally Graded Material Plate around a Hole
Stress concentration factors have been examined in a functionally graded material (FGM) plate with central holes in different shapes in this essay. The material properties change along the thickness of plate. ABAQUS software has been utilized for modeling of problem in which subroutine of ABAQUS sub-program was used for modeling of the targeted material. The considering shapes for hole in plate...
متن کاملEffect of Out-of-Plane Deformation on Relaxation Method of Stress Concentration in a Plate with a Circular Hole
In structures, stress concentration is a factor of fatigue fracture. Basically, the stress concentration is a phenomenon that should be avoided. However, it is difficult to avoid the stress concentration. Therefore, relaxation of the stress concentration is important. The stress concentration arises from notches and circular holes. There is a relaxation method that a composite patch covers a no...
متن کاملStudy of The Effect of Hole Location on Stress Analysis of a Plate Subjected to Uni-axial Load by Using Numerical and Exact Solution
In the present study, stress analysis and explicit solution of rectangular plate with arbitrarily located circular hole, subjected to linear normal stresses on two opposite edges, has been investigated. Airy function and hoop stresses occurring at the edge of the circular have been computed. In this method 2D dimension elasticity and Airy stress function was used. The present method for explici...
متن کامل