A Calibration Technique for a Redundant IMU
نویسندگان
چکیده
A calibration technique for a redundant inertial measurement unit (IMU) containing low-grade inertial sensors is proposed. In order to calibrate a redundant IMU that can detect and isolate faulty sensors, the fundamental coordinate frames in the IMU are defined and the IMU error is modeled based on the frames. Equations to estimate the error coefficients of the redundant IMU are formulated, and a test sequence using a 2-axis turntable is also presented. Finally, a redundant IMU with cone configuration is implemented using lowgrade inertial sensors, and the performance of the proposed technique is verified experimentally.
منابع مشابه
A Novel System-Level Calibration Method for Gimballed Platform IMU Using Optimal Estimation
An accurate calibration of inertial measurement unit errors is increasingly important as the inertial navigation system requirements become more stringent. Developing calibration methods that use as less as possible of IMU signals has 6-DOF gimballed IMU in space-stabilized mode is presented. It is considered as held stationary in the test location incorporating 15 di...
متن کاملImproving low-cost inertial-measurement-unit (IMU)-based motion tracking accuracy for a biomorphic hyper-redundant snake robot
This paper develops and experimentally validates a 3D-printed snake robot prototype. Its structure is designed to allocate limited room for each functional module (including an external power module, battery power module, the wireless control and transmission module and some detective sensors), so as to ensure the snake robot works in different environments. In order to control and track the sn...
متن کاملPrecision and Reliability Incensement of Inertial Navigation System with Rotation and Redundancy
Precision and reliability are two main performance characteristic in low-cost Inertial Navigation System(INS). Increase of precision in low-cost INS without auxiliary sensors is main challenge. Bias instability leads to position drift error in inertial navigation system. In addition, fault occurrence makes the sensor reliability is decreased. Rotation of Inertial Measurement Unit(RIMU) and use ...
متن کاملLiDAR-IMU Time Delay Calibration Based on Iterative Closest Point and Iterated Sigma Point Kalman Filter. Sensors 2017, 17, 539
The time delay calibration between Light Detection and Ranging (LiDAR) and Inertial Measurement Units (IMUs) is an essential prerequisite for its applications. However, the correspondences between LiDAR and IMU measurements are usually unknown, and thus cannot be computed directly for the time delay calibration. In order to solve the problem of LiDAR-IMU time delay calibration, this paper prese...
متن کاملA Single Step Calibration Procedure for Imu/gps in Aerial Photogrammetry
System calibration is required in integrated IMU/GPS systems to account for the spatial offset and misalignment between IMU, GPS and camera frames; synchronization is to be maintained, to predict IMU/GPS position and orientation data at the mid-exposure time of the images. To this aim, measurement on the ground, complemented by a calibration flight over a test field, are performed. Depending on...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005